Help for Cisco 7200 simulator

Help for Cisco 7200 simulator (dynamips-0.2.4)
==============================================
Authors: Fabien Devaux, Christophe Fillot, MtvE

Emulated hardware
*****************

By default, a NPE-200 is emulated. You can choose the NPE type with the
"-t" option. It is possible to select "npe-100", "npe-150", "npe-175",
"npe-200", "npe-225", "npe-300" and "npe-400". The "npe-g1" is not working.

Please note that you must use the C7200-IO-FE PA driver as IO card if you
want a FastEthernet interface in slot 0. For other slots, you must use
the PA-FE-TX driver.

Command Line Options overview
*****************************

-r <ram_size> : Set the virtual RAM size (default is 256 Mb)
-o <rom_size> : Set the virtual ROM size (default is 4 Mb)
-n <nvram_size> : Set the NVRAM size (default is 128 Kb)
-l <log_file> : Set logging file (default is pred_log0.txt)
-C <cfg_file> : Import an IOS configuration file into NVRAM
-X : Do not use a file to simulate RAM (faster)
-R <rom_file> : Load an alternate ROM (default is embedded)
-S <sym_file> : Load a symbol file
-c <conf_reg> : Set the configuration register (default is 0x2102)
-m <mac_addr> : Set the MAC address of the chassis (IOS chooses default)
-k <clock_div> : Set the clock divisor (default is 2)
-T <port> : Console is on TCP <port> (default is on the terminal)
-A <port> : AUX is on TCP <port> (default is no AUX port)
-i : Instruction block trace, very slow
-j : Disable the JIT compiler, very slow
-t <npe_type> : Select NPE type
-M <midplane> : Select Midplane ("std" or "vxr")
-p <pa_desc> : Define a Port Adapter
-s <pa_nio> : Bind a Network IO interface to a Port Adapter
-a <cfg_file> : Virtual ATM switch configuration file
-f <cfg_file> : Virtual Frame relay switch configuration file
-b <cfg_file> : Virtual bridge configuration file
-e : Show network device list of the host machine

Command Line Options details
****************************

<clock_div> :

Specify the clock divider (integer) based on the host clock.
Alter the value to match the CISCO clock with the real time.
The command "show clock" at the IOS' CLI will help you set this value.

<pa_desc> :

Format: slot:pa_driver:netio_type[:netio_parameters]

slot : the number of the physical slot (starts from 0)

pa_driver : the name of a port adapter driver in:
- C7200-IO-FE (FastEthernet, slot 0 only)
- PA-FE-TX (FastEthernet, slots 1 to 6)
- PA-4T (Serial, 4 ports)
- PA-8T (Serial, 8 ports)
- PA-A1 (ATM)

<pa_nio> :

Format: slot:port:netio_type[:netio_parameters]

slot : the number of the physical slot (starts from 0)
port : the port in the specified slot (starts from 0)

netio_type : host interface for communication

unix:<local_sock>:<remote_sock>
Use unix sockets for local communication.
<local_sock> is created and represents the local NIC.
<remote_sock> is the file used by the other interface.
(ex. "/tmp/local:/tmp/remote")

tap:<tap_name>
Use a virtual ethernet device for communication.
<tap_name> is the name of the tap device (ex. "tap0")

gen_eth:<dev_name>
Use a real ethernet device for communication, using libpcap 0.9
or WinPcap. Works on Windows and Unix systems.

<dev_name> is the name of the Ethernet device (ex. "eth0")

The device list can be found using the "-e" option.

linux_eth:<dev_name>
Use a real ethernet device for communication (Linux specific).
<dev_name> is the name of the Ethernet device (ex. "eth0")

udp:<local_port>:<remote_host>:<remote_port>
Use an UDP socket for connection between remote instances.
<local_port> is the port we listen to.
<remote_host> is the host listening the port you want to connect to.
<remote_port> is the port you want to connect to.
(ex. "1000:somehost:2000" and "2000:otherhost:1000" on the other
side)

tcp_cli:<host>:<port>
Client side of a tcp connection.
<host> is the ip address of the server.
<port> is the port to connect to.

tcp_ser:<port>
Server side of a tcp connection.
<port> is the port to listen to.

标签：

版权申明：本站文章部分自网络，如有侵权，请联系：west999com@outlook.com
特别注意：本站所有转载文章言论不代表本站观点，本站所提供的摄影照片，插画，设计作品，如需使用，请与原作者联系，版权归原作者所有