Cisco IGMP filter Configure

2008-02-23 04:54:28来源：互联网阅读 ()

SW1#

ip igmp profile 1
permit
range 224.1.1.1 224.1.1.100

interface FastEthernet0/4
ip igmp filter 1
-----------------------------------

R4#

interface Ethernet0/0
ip igmp join-group 224.1.1.1
ip igmp join-group 224.1.1.2
ip igmp join-group 224.1.1.101
------------------------------------

SW1#sh ip igmp filter
IGMP filter enabled
SW1#sh ip igmp profile
IGMP Profile 1
permit
range 224.1.1.1 224.1.1.100
SW1#
14:25:15: IGMPFILTER: igmp_profile_detach() detaching profile 1 (ref_ct -3, destroy not requested)

14:27:49: IGMPFILTER: igmp_filter_process_pkt(): checking group 224.1.1.1 from Fa0/4: permit

14:27:49: IGMPFILTER: igmp_filter_process_pkt(): checking group 224.1.1.2 from Fa0/4: permit

14:27:49: IGMPFILTER: igmp_filter_process_pkt(): checking group 224.1.1.101 from Fa0/4: deny

================================================== ===================
SW1#

ip igmp profile 1
range 224.1.1.1 224.1.1.100

interface FastEthernet0/4
switchport mode dynamic desirable
ip igmp filter 1
-----------------------------------------------------------------------

R4#

interface Ethernet0/0
ip igmp join-group 224.1.1.1
ip igmp join-group 224.1.1.2
ip igmp join-group 224.1.1.101
-----------------------------------------------------------------------
14:38:10: IGMPFILTER: igmp_filter_process_pkt(): checking group 224.1.1.1 from Fa0/4: deny

14:38:10: IGMPFILTER: igmp_filter_process_pkt(): checking group 224.1.1.2 from Fa0/4: deny

14:38:10: IGMPFILTER: igmp_filter_process_pkt(): checking group 224.1.1.101 from Fa0/4: permit
================================================== ======================
Summary:
A permit action permits the specified range with an implicit deny.
A deny action denies the specified range with an implicit permit.
================================================== ======================

标签：

版权申明：本站文章部分自网络，如有侵权，请联系：west999com@outlook.com
特别注意：本站所有转载文章言论不代表本站观点，本站所提供的摄影照片，插画，设计作品，如需使用，请与原作者联系，版权归原作者所有