使用webgl(three.js)创建3D机房(升级版)-普通机…

2019-03-10 11:52:48来源:博客园 阅读 ()

新老客户大回馈,云服务器低至5折

  序:

   目前市面上的数据中心主要分两大类,一类属于普通数据中心,机柜按照XY轴 有序排放,一类属于微模块集合的数据中心,多个机柜组合而成的微模块。

   本节课主要详细讲解普通数据中心的可视化展示,浏览器直接查看机房实时3D数据。

   功能简述:普通3D机房搭建,机柜、服务器、端口实时监控 数据联动展示,机柜动态添加、服务器上下架,动力环境数据可视化展示(温湿度云图,防盗门禁,配店,管线控制)、告警展示;

   技术难点:

    一、如何有效快速根据实际场景搭建机房模型

       解决方案:封装各代码模型,复用代码模型,争取快速有效搭建机房

    二、如何接入实时数据

      解决方案:使用一次请求,变化更新,订阅通知机制

    三、如何有效控制各场景间的切换平滑过渡,无卡顿,无延迟

      解决方案:使用 状态机 策略,有效控制状态变更与回滚,及时把控各状态之间的切换

    四、如何控制加载速度、浏览器内存、上万台服务器场景,如何有效控制帧率与处理速度

       解决方案:使用代码模型,降低模型占中空间,使用瓦片策略,实现所见即所载,减少提笔浏览器提笔次数,保证帧率与速度。

   三维数据可视化执行的意义:

    为什么需要可视化展示,我总结如下几点:

    a、实用性:直观快速的展示数据,提示告警,快速定位问题,为解决问题节省大量时间,

    b、成本管理:成本对于企业来讲是至关重要的,三维可视化可以为高层领导者,执行者提供最快捷的管理方案

    c、去专业化:本着代码改变世界的愿望,可视化操控就是为了让更多人的能够看懂、操作所谓专业的东西,

    d、科技:越是科技的东西,越需要直观的展示,越是复杂的东西越需要简单的描述。可视化恰恰解决了这个痛点。

    e、体面:企业的数据大屏是企业的形象,三维可视化可快速提示企业高大上的企业形象,向客户展示企业的实力与精致,

    d、轻便:这是技术的实现方式,使用电脑浏览器 或者手机浏览器直接查看三维机房,方便快捷

  如有不妥之处,还望指出 交流邮箱:1203193731@qq.com

效果与功能展示:

 一、机房建模

a、普通机房

 

 数据中心代码模型:

 

  var models = [{  // 地板
        "show": true,
        "uuid": "",
        "name": "DCR01_floor",
        "objType": "cube2",
        "length": 2350+400,
        "width": 2000+400,
        "height": 10,
        "x": 0,
        "y": 0,
        "z": 0,
        "style": {
            "skinColor": 16777215,
            "skin": {
                "skin_up": {
                    "skinColor": 16777215,
                    "side": 1,
                    "opacity": 1,
                    //"imgurl": "../../img/3dImg/proj/DCR01.png",
                    "imgurl": "../img/3dImg/wall/floor5.jpg",
                    "repeatx": true,
                    "width": 20,
                    "repeaty": true,
                    "height": 30
                },
                "skin_down": {
                    "skinColor": 16777215,
                    "side": 1,
                    "opacity": 1
                },
                "skin_fore": {
                    "skinColor": 16777215,
                    "side": 1,
                    "opacity": 1
                },
                "skin_behind": {
                    "skinColor": 16777215,
                    "side": 1,
                    "opacity": 1
                },
                "skin_left": {
                    "skinColor": 16777215,
                    "side": 1,
                    "opacity": 1
                },
                "skin_right": {
                    "skinColor": 16777215,
                    "side": 1,
                    "opacity": 1
                }
            }
        },
        "showSortNub": 1,
        "customType1": "",
        "customType2": "",
        "animation": null,
        "dbclickEvents": null,
        "rotation": [{
            "direction": "x",
            "degree": 0
        }, {
            "direction": "y",
            "degree": 0
        }, {
            "direction": "z",
            "degree": 0
        }],
        "thick": null,
        "scale": {
            "x": 1,
            "y": 1,
            "z": 1
        },
        "BindDevId": null,
        "BindDevName": null,
        "devInfo": null,
        "BindMeteId": null,
        "BindMeteName": null
    },/*空调开始*/
    {
        "show": true,
        "uuid": "",
        "name": "DCR01_airConditionMain_1",
        "objType": "cube2",
        "length": 450,
        "width": 150,
        "height": 400,
        "x": 0,
        "y": 210,
        "z": -680,
        "style": {
            "skinColor": 16777215,
            "skin": {
                "skin_up": {
                    "skinColor": 16777215,
                    "side": 1,
                    "opacity": 1,
                    "imgurl": "../img/3dImg/airconfigTop.jpg"
                },
                "skin_down": {
                    "skinColor": 16777215,
                    "side": 1,
                    "opacity": 1,
                    "imgurl": "../img/3dImg/rack_inside.jpg"
                },
                "skin_fore": {
                    "skinColor": 16777215,
                    "side": 1,
                    "opacity": 1,
                    "imgurl": "../img/3dImg/rack_inside.jpg"
                },
                "skin_behind": {
                    "skinColor": 16777215,
                    "side": 1,
                    "opacity": 1,
                    "imgurl": "../img/3dImg/rack_inside.jpg"
                },
                "skin_left": {
                    "skinColor": 16777215,
                    "side": 1,
                    "opacity": 1,
                    "imgurl": "../img/3dImg/rack_inside.jpg"
                },
                "skin_right": {
                    "skinColor": 11579568,
                    "side": 1,
                    "opacity": 1,
                    "imgurl": "../img/3dImg/airconfig.jpg"
                }
            }
        },
        "showSortNub": 31,
        "customType1": "",
        "customType2": "",
        "animation": null,
        "dbclickEvents": null,
        "rotation": [{
            "direction": "x",
            "degree": 0
        }, {
            "direction": "y",
            "degree": 0
        }, {
            "direction": "z",
            "degree": 0
        }],
        "thick": null,
        "scale": {
            "x": 1,
            "y": 1,
            "z": 1
        },
        "BindDevId": null,
        "BindDevName": null,
        "devInfo": null,
        "BindMeteId": null,
        "BindMeteName": null
    }, {
        "show": true,
        "uuid": "",
        "name": "DCR01_airConditionLogo_1",
        "objType": "cube2",
        "length": 70,
        "width": 20,
        "height": 150,
        "x": 165.066,
        "y": 339.192,
        "z": -605.478,
        "style": {
            "skinColor": 16777215,
            "skin": {
                "skin_up": {
                    "skinColor": 16777215,
                    "side": 1,
                    "opacity": 1,
                    "imgurl": "../img/3dImg/airconfigLogoTop.jpg"
                },
                "skin_down": {
                    "skinColor": 16777215,
                    "side": 1,
                    "opacity": 1,
                    "imgurl": "../img/3dImg/airconfigLogoTop.jpg"
                },
                "skin_fore": {
                    "skinColor": 16777215,
                    "side": 1,
                    "opacity": 1,
                    "imgurl": "../img/3dImg/airconfigLogoTop.jpg"
                },
                "skin_behind": {
                    "skinColor": 16777215,
                    "side": 1,
                    "opacity": 1,
                    "imgurl": "../img/3dImg/airconfigLogoTop.jpg"
                },
                "skin_left": {
                    "skinColor": 16777215,
                    "side": 1,
                    "opacity": 1,
                    "imgurl": "../img/3dImg/airconfigLogoTop.jpg"
                },
                "skin_right": {
                    "skinColor": 11579568,
                    "side": 1,
                    "opacity": 1,
                    "imgurl": "../img/3dImg/airconfigLogo.jpg"
                }
            }
        },
        "showSortNub": 31,
        "customType1": "",
        "customType2": "",
        "animation": null,
        "dbclickEvents": null,
        "rotation": [{
            "direction": "x",
            "degree": 0
        }, {
            "direction": "y",
            "degree": 0
        }, {
            "direction": "z",
            "degree": 0
        }],
        "thick": null,
        "scale": {
            "x": 1,
            "y": 1,
            "z": 1
        },
        "BindDevId": null,
        "BindDevName": null,
        "devInfo": null,
        "BindMeteId": null,
        "BindMeteName": null
    },
    {
        "show": true,
        "uuid": "",
        "name": "DCR01_airConditionMain_2",
        "objType": "cube2",
        "length": 450,
        "width": 150,
        "height": 400,
        "x": 1045,
        "y": 210,
        "z": -270,
        "style": {
            "skinColor": 16777215,
            "skin": {
                "skin_up": {
                    "skinColor": 16777215,
                    "side": 1,
                    "opacity": 1,
                    "imgurl": "../img/3dImg/airconfigTop.jpg"
                },
                "skin_down": {
                    "skinColor": 16777215,
                    "side": 1,
                    "opacity": 1,
                    "imgurl": "../img/3dImg/rack_inside.jpg"
                },
                "skin_fore": {
                    "skinColor": 16777215,
                    "side": 1,
                    "opacity": 1,
                    "imgurl": "../img/3dImg/rack_inside.jpg"
                },
                "skin_behind": {
                    "skinColor": 16777215,
                    "side": 1,
                    "opacity": 1,
                    "imgurl": "../img/3dImg/rack_inside.jpg"
                },
                "skin_left": {
                    "skinColor": 16777215,
                    "side": 1,
                    "opacity": 1,
                    "imgurl": "../img/3dImg/rack_inside.jpg"
                },
                "skin_right": {
                    "skinColor": 11579568,
                    "side": 1,
                    "opacity": 1,
                    "imgurl": "../img/3dImg/airconfig.jpg"
                }
            }
        },
        "showSortNub": 31,
        "customType1": "",
        "customType2": "",
        "animation": null,
        "dbclickEvents": null,
        "rotation": [{
            "direction": "x",
            "degree": 0
        }, {
            "direction": "y",
            "degree": -Math.PI / 2
        }, {
            "direction": "z",
            "degree": 0
        }],
        "thick": null,
        "scale": {
            "x": 1,
            "y": 1,
            "z": 1
        },
        "BindDevId": null,
        "BindDevName": null,
        "devInfo": null,
        "BindMeteId": null,
        "BindMeteName": null
    }, {
        "show": true,
        "uuid": "",
        "name": "DCR01_airConditionLogo_2",
        "objType": "cube2",
        "length": 70,
        "width": 20,
        "height": 150,
        "x": 975.066,
        "y": 339.192,
        "z": -110.478,
        "style": {
            "skinColor": 16777215,
            "skin": {
                "skin_up": {
                    "skinColor": 16777215,
                    "side": 1,
                    "opacity": 1,
                    "imgurl": "../img/3dImg/airconfigLogoTop.jpg"
                },
                "skin_down": {
                    "skinColor": 16777215,
                    "side": 1,
                    "opacity": 1,
                    "imgurl": "../img/3dImg/airconfigLogoTop.jpg"
                },
                "skin_fore": {
                    "skinColor": 16777215,
                    "side": 1,
                    "opacity": 1,
                    "imgurl": "../img/3dImg/airconfigLogoTop.jpg"
                },
                "skin_behind": {
                    "skinColor": 16777215,
                    "side": 1,
                    "opacity": 1,
                    "imgurl": "../img/3dImg/airconfigLogoTop.jpg"
                },
                "skin_left": {
                    "skinColor": 16777215,
                    "side": 1,
                    "opacity": 1,
                    "imgurl": "../img/3dImg/airconfigLogoTop.jpg"
                },
                "skin_right": {
                    "skinColor": 11579568,
                    "side": 1,
                    "opacity": 1,
                    "imgurl": "../img/3dImg/airconfigLogo.jpg"
                }
            }
        },
        "showSortNub": 31,
        "customType1": "",
        "customType2": "",
        "animation": null,
        "dbclickEvents": null,
        "rotation": [{
            "direction": "x",
            "degree": 0
        }, {
            "direction": "y",
            "degree": -Math.PI / 2
        }, {
            "direction": "z",
            "degree": 0
        }],
        "thick": null,
        "scale": {
            "x": 1,
            "y": 1,
            "z": 1
        },
        "BindDevId": null,
        "BindDevName": null,
        "devInfo": null,
        "BindMeteId": null,
        "BindMeteName": null
    },  /*空调结束*/
    {  /*墙面开始*/
        "show": true,
        "uuid": "",
        "name": "DCR01_wall_1",
        "objType": "cube2",
        "length": 20,
        "width": 1555, // 2530
        "height": 500,
        "x": -398,
        "y": 250,
        "z": -780,
        "style": {
            "skinColor": 16777215,
            "skin": {
                "skin_up": {
                    "skinColor": 16777215,
                    "side": 1,
                    "opacity": 1
                },
                "skin_down": {
                    "skinColor": 16777215,
                    "side": 1,
                    "opacity": 1
                },
                "skin_fore": {
                    "skinColor": 16777215,
                    "side": 1,
                    "opacity": 1,
                    "imgurl": "../img/3dImg/wall/wall16.jpg",
                    "repeatx": true,
                    "width": 10,
                    "repeaty": true,
                    "height": 1
                },
                "skin_behind": {
                    "skinColor": 16777215,
                    "side": 1,
                    "opacity": 1,
                    "imgurl": "../img/3dImg/wall/wall16.jpg",
                    "repeatx": true,
                    "width": 10,
                    "repeaty": true,
                    "height": 1
                },
                "skin_left": {
                    "skinColor": 16777215,
                    "side": 1,
                    "opacity": 1
                },
                "skin_right": {
                    "skinColor": 16777215,
                    "side": 1,
                    "opacity": 1
                }
            }
        },
        "showSortNub": 447,
        "customType1": "",
        "customType2": "",
        "animation": null,
        "dbclickEvents": null,
        "rotation": [{
            "direction": "x",
            "degree": 0
        }, {
            "direction": "y",
            "degree": Math.PI / 2
        }, {
            "direction": "z",
            "degree": 0
        }],
        "thick": null,
        "scale": {
            "x": 1,
            "y": 1,
            "z": 1
        },
        "BindDevId": null,
        "BindDevName": null,
        "devInfo": null,
        "BindMeteId": null,
        "BindMeteName": null
    },
    {
        "show": true,
        "uuid": "",
        "name": "DCR01_wall_5",
        "objType": "cube2",
        "length": 20,
        "width": 395,
        "height": 500,
        "x": 985,
        "y": 250,
        "z": -780,
        "style": {
            "skinColor": 16777215,
            "skin": {
                "skin_up": {
                    "skinColor": 16777215,
                    "side": 1,
                    "opacity": 1
                },
                "skin_down": {
                    "skinColor": 16777215,
                    "side": 1,
                    "opacity": 1
                },
                "skin_fore": {
                    "skinColor": 16777215,
                    "side": 1,
                    "opacity": 1,
                    "imgurl": "../img/3dImg/wall/wall16.jpg",
                    "repeatx": true,
                    "width": 10,
                    "repeaty": true,
                    "height": 1
                },
                "skin_behind": {
                    "skinColor": 16777215,
                    "side": 1,
                    "opacity": 1,
                    "imgurl": "../img/3dImg/wall/wall16.jpg",
                    "repeatx": true,
                    "width": 10,
                    "repeaty": true,
                    "height": 1
                },
                "skin_left": {
                    "skinColor": 16777215,
                    "side": 1,
                    "opacity": 1
                },
                "skin_right": {
                    "skinColor": 16777215,
                    "side": 1,
                    "opacity": 1
                }
            }
        },
        "showSortNub": 447,
        "customType1": "",
        "customType2": "",
        "animation": null,
        "dbclickEvents": null,
        "rotation": [{
            "direction": "x",
            "degree": 0
        }, {
            "direction": "y",
            "degree": Math.PI / 2
        }, {
            "direction": "z",
            "degree": 0
        }],
        "thick": null,
        "scale": {
            "x": 1,
            "y": 1,
            "z": 1
        },
        "BindDevId": null,
        "BindDevName": null,
        "devInfo": null,
        "BindMeteId": null,
        "BindMeteName": null
    },
    {
        "show": true,
        "uuid": "",
        "name": "DCR01_wall_6", // 门上墙
        "objType": "cube2",
        "length": 20,
        "width": 416,
        "height": 90,
        "x": 584.406,
        "y": 454.771,
        "z": -780.278,
        "style": {
            "skinColor": 16777215,
            "skin": {
                "skin_up": {
                    "skinColor": 16777215,
                    "side": 1,
                    "opacity": 1
                },
                "skin_down": {
                    "skinColor": 16777215,
                    "side": 1,
                    "opacity": 1
                },
                "skin_fore": {
                    "skinColor": 16777215,
                    "side": 1,
                    "opacity": 1,
                    "imgurl": "../img/3dImg/wall/wall16.jpg",
                    "repeatx": true,
                    "width": 1,
                    "repeaty": true,
                    "height": 1
                },
                "skin_behind": {
                    "skinColor": 16777215,
                    "side": 1,
                    "opacity": 1,
                    "imgurl": "../img/3dImg/wall/wall16.jpg",
                    "repeatx": true,
                    "width": 1,
                    "repeaty": true,
                    "height": 1
                },
                "skin_left": {
                    "skinColor": 16777215,
                    "side": 1,
                    "opacity": 1
                },
                "skin_right": {
                    "skinColor": 16777215,
                    "side": 1,
                    "opacity": 1
                }
            }
        },
        "showSortNub": 467,
        "customType1": "",
        "customType2": "",
        "animation": null,
        "dbclickEvents": null,
        "rotation": [{
            "direction": "x",
            "degree": 0
        }, {
            "direction": "y",
            "degree": -Math.PI / 2
        }, {
            "direction": "z",
            "degree": 0
        }],
        "thick": null,
        "scale": {
            "x": 1,
            "y": 1,
            "z": 1
        },
        "BindDevId": null,
        "BindDevName": null,
        "devInfo": null,
        "BindMeteId": null,
        "BindMeteName": null
    },
    {
        "show": true,
        "uuid": "",
        "name": "DCR01_wall_2",
        "objType": "cube2",
        "length": 20,
        "width": 2350,
        "height": 500,
        "x": 0,
        "y": 250,
        "z": 1000,
        "style": {
            "skinColor": 16777215,
            "skin": {
                "skin_up": {
                    "skinColor": 16777215,
                    "side": 1,
                    "opacity": 1
                },
                "skin_down": {
                    "skinColor": 16777215,
                    "side": 1,
                    "opacity": 1
                },
                "skin_fore": {
                    "skinColor": 16777215,
                    "side": 1,
                    "opacity": 1,
                    "imgurl": "../img/3dImg/wall/wall16.jpg",
                    "repeatx": true,
                    "width": 10,
                    "repeaty": true,
                    "height": 1
                },
                "skin_behind": {
                    "skinColor": 16777215,
                    "side": 1,
                    "opacity": 1,
                    "imgurl": "../img/3dImg/wall/wall16.jpg",
                    "repeatx": true,
                    "width": 10,
                    "repeaty": true,
                    "height": 1
                },
                "skin_left": {
                    "skinColor": 16777215,
                    "side": 1,
                    "opacity": 1
                },
                "skin_right": {
                    "skinColor": 16777215,
                    "side": 1,
                    "opacity": 1
                }
            }
        },
        "showSortNub": 447,
        "customType1": "",
        "customType2": "",
        "animation": null,
        "dbclickEvents": null,
        "rotation": [{
            "direction": "x",
            "degree": 0
        }, {
            "direction": "y",
            "degree": Math.PI / 2
        }, {
            "direction": "z",
            "degree": 0
        }],
        "thick": null,
        "scale": {
            "x": 1,
            "y": 1,
            "z": 1
        },
        "BindDevId": null,
        "BindDevName": null,
        "devInfo": null,
        "BindMeteId": null,
        "BindMeteName": null
    }, {
        "show": true,
        "uuid": "",
        "name": "DCR01_wall_3",
        "objType": "cube2",
        "length": 20,
        "width": 1795,
        "height": 500,
        "x": 1175,
        "y": 250,
        "z": 110,
        "style": {
            "skinColor": 16777215,
            "skin": {
                "skin_up": {
                    "skinColor": 16777215,
                    "side": 1,
                    "opacity": 1
                },
                "skin_down": {
                    "skinColor": 16777215,
                    "side": 1,
                    "opacity": 1
                },
                "skin_fore": {
                    "skinColor": 16777215,
                    "side": 1,
                    "opacity": 1,
                    "imgurl": "../img/3dImg/wall/wall16.jpg",
                    "repeatx": true,
                    "width": 10,
                    "repeaty": true,
                    "height": 1
                },
                "skin_behind": {
                    "skinColor": 16777215,
                    "side": 1,
                    "opacity": 1,
                    "imgurl": "../img/3dImg/wall/wall16.jpg",
                    "repeatx": true,
                    "width": 10,
                    "repeaty": true,
                    "height": 1
                },
                "skin_left": {
                    "skinColor": 16777215,
                    "side": 1,
                    "opacity": 1
                },
                "skin_right": {
                    "skinColor": 16777215,
                    "side": 1,
                    "opacity": 1
                }
            }
        },
        "showSortNub": 447,
        "customType1": "",
        "customType2": "",
        "animation": null,
        "dbclickEvents": null,
        "rotation": [{
            "direction": "x",
            "degree": 0
        }, {
            "direction": "y",
            "degree": 0
        }, {
            "direction": "z",
            "degree": 0
        }],
        "thick": null,
        "scale": {
            "x": 1,
            "y": 1,
            "z": 1
        },
        "BindDevId": null,
        "BindDevName": null,
        "devInfo": null,
        "BindMeteId": null,
        "BindMeteName": null
    }, {
        "show": true,
        "uuid": "",
        "name": "DCR01_wall_4",
        "objType": "cube2",
        "length": 20,
        "width": 1795,
        "height": 500,
        "x": -1175,
        "y": 250,
        "z": 110,
        "style": {
            "skinColor": 16777215,
            "skin": {
                "skin_up": {
                    "skinColor": 16777215,
                    "side": 1,
                    "opacity": 1
                },
                "skin_down": {
                    "skinColor": 16777215,
                    "side": 1,
                    "opacity": 1
                },
                "skin_fore": {
                    "skinColor": 16777215,
                    "side": 1,
                    "opacity": 1,
                    "imgurl": "../img/3dImg/wall/wall16.jpg",
                    "repeatx": true,
                    "width": 10,
                    "repeaty": true,
                    "height": 1
                },
                "skin_behind": {
                    "skinColor": 16777215,
                    "side": 1,
                    "opacity": 1,
                    "imgurl": "../img/3dImg/wall/wall16.jpg",
                    "repeatx": true,
                    "width": 10,
                    "repeaty": true,
                    "height": 1
                },
                "skin_left": {
                    "skinColor": 16777215,
                    "side": 1,
                    "opacity": 1
                },
                "skin_right": {
                    "skinColor": 16777215,
                    "side": 1,
                    "opacity": 1
                }
            }
        },
        "showSortNub": 447,
        "customType1": "",
        "customType2": "",
        "animation": null,
        "dbclickEvents": null,
        "rotation": [{
            "direction": "x",
            "degree": 0
        }, {
            "direction": "y",
            "degree": 0
        }, {
            "direction": "z",
            "degree": 0
        }],
        "thick": null,
        "scale": {
            "x": 1,
            "y": 1,
            "z": 1
        },
        "BindDevId": null,
        "BindDevName": null,
        "devInfo": null,
        "BindMeteId": null,
        "BindMeteName": null
    }, /*墙结束*/
    {
        "show": true,
        "uuid": "",
        "name": "DCR01_door_1",
        "objType": "cube2",
        "length": 8,
        "width": 208,
        "height": 410,
        "x": 480,
        "y": 210,
        "z": -780.213,
        "style": {
            "skinColor": 16777215,
            "skin": {
                "skin_up": {
                    "skinColor": 16777215,
                    "side": 1,
                    "opacity": 1,
                    "imgurl": "../img/3dImg/rack_inside.jpg"
                },
                "skin_down": {
                    "skinColor": 16777215,
                    "side": 1,
                    "opacity": 1
                },
                "skin_fore": {
                    "skinColor": 16777215,
                    "side": 1,
                    "opacity": 1,
                    "imgurl": "../img/3dImg/door_right.png"
                },
                "skin_behind": {
                    "skinColor": 16777215,
                    "side": 1,
                    "opacity": 1,
                    "imgurl": "../img/3dImg/door_left.png"
                },
                "skin_left": {
                    "skinColor": 16777215,
                    "side": 1,
                    "opacity": 1,
                    "imgurl": "../img/3dImg/door_right.png"
                },
                "skin_right": {
                    "skinColor": 16777215,
                    "side": 1,
                    "opacity": 1,
                    "imgurl": "../img/3dImg/door_right.png"
                }
            }
        },
        "showSortNub": 1,
        "customType1": "",
        "customType2": "",
        "animation": null,
        "dbclickEvents": null,
        "rotation": [{
            "direction": "x",
            "degree": 0
        }, {
            "direction": "y",
            "degree": Math.PI / 2
        }, {
            "direction": "z",
            "degree": 0
        }],
        "thick": null,
        "scale": {
            "x": 1,
            "y": 1,
            "z": 1
        },
        "BindDevId": null,
        "BindDevName": null,
        "devInfo": null,
        "BindMeteId": null,
        "BindMeteName": null
    },
    {
        "show": true,
        "uuid": "",
        "name": "DCR01_door_2",
        "objType": "cube2",
        "length": 8,
        "width": 208,
        "height": 410,
        "x": 680,
        "y": 210,
        "z": -780.213,
        "style": {
            "skinColor": 16777215,
            "skin": {
                "skin_up": {
                    "skinColor": 16777215,
                    "side": 1,
                    "opacity": 1,
                    "imgurl": "../img/3dImg/rack_inside.jpg"
                },
                "skin_down": {
                    "skinColor": 16777215,
                    "side": 1,
                    "opacity": 1
                },
                "skin_fore": {
                    "skinColor": 16777215,
                    "side": 1,
                    "opacity": 1,
                    "imgurl": "../img/3dImg/door_left.png"
                },
                "skin_behind": {
                    "skinColor": 16777215,
                    "side": 1,
                    "opacity": 1,
                    "imgurl": "../img/3dImg/door_right.png"
                },
                "skin_left": {
                    "skinColor": 16777215,
                    "side": 1,
                    "opacity": 1
                },
                "skin_right": {
                    "skinColor": 16777215,
                    "side": 1,
                    "opacity": 1
                }
            }
        },
        "showSortNub": 1,
        "customType1": "",
        "customType2": "",
        "animation": null,
        "dbclickEvents": null,
        "rotation": [{
            "direction": "x",
            "degree": 0
        }, {
            "direction": "y",
            "degree": Math.PI / 2
        }, {
            "direction": "z",
            "degree": 0
        }],
        "thick": null,
        "scale": {
            "x": 1,
            "y": 1,
            "z": 1
        },
        "BindDevId": null,
        "BindDevName": null,
        "devInfo": null,
        "BindMeteId": null,
        "BindMeteName": null
    }, {
        "objType": "jsonobj",
        "fileurl": "../img/3dImg/OBJS/FireExtinguisher.json",  // 灭火器
        "name": "TCL_mhq_1",
        "scale": {
            "x": 20,
            "y": 15,
            "z": 20
        },
        "position": {
            "x": 1045,
            "y": 9,
            "z": 400,
        },
        "rotation": [{
            "direction": "x",
            "degree": 0
        }, {
            "direction": "y",
            "degree": 0.3141592653589793
        }, {
            "direction": "z",
            "degree": 0
        }],
        "showSortNub": 146,
        "show": true,
        "customType1": "",
        "customType2": "",
        "animation": null,
        "dbclickEvents": null,
        "BindDevId": null,
        "BindDevName": null,
        "devInfo": null,
        "BindMeteId": null,
        "BindMeteName": null
    }, {
        "objType": "jsonobj",
        "fileurl": "../img/3dImg/OBJS/FireExtinguisher.json",  // 灭火器
        "name": "TCL_mhq_2",
        "scale": {
            "x": 20,
            "y": 15,
            "z": 20
        },
        "position": {
            "x": 1045,
            "y": 9,
            "z": 420,
        },
        "rotation": [{
            "direction": "x",
            "degree": 0
        }, {
            "direction": "y",
            "degree": 0.3141592653589793
        }, {
            "direction": "z",
            "degree": 0
        }],
        "showSortNub": 146,
        "show": true,
        "customType1": "",
        "customType2": "",
        "animation": null,
        "dbclickEvents": null,
        "BindDevId": null,
        "BindDevName": null,
        "devInfo": null,
        "BindMeteId": null,
        "BindMeteName": null
    },
    {
        "show": false,
        "uuid": "",
        "name": "DCR01_airConditionMain_1_wind",  //
        "objType": "flowTube",
        "points": [{
            "x": 0,
            "y": 0,
            "z": 0
        }, {
            "x": 0,
            "y": 50,
            "z": 100
        }, {
            "x": 0,
            "y": 50,
            "z": 400
        }],
        "position": {
            "x": 0.791,
            "y": 378.066,
            "z": -680.816
        },
        "scale": {
            "x": 1,
            "y": 1,
            "z": 1
        },
        "rotation": [{
            "direction": "x",
            "degree": 0
        }, {
            "direction": "y",
            "degree": 0
        }, {
            "direction": "z",
            "degree": 0
        }],
        "style": {
            "skinColor": 16772846,
            "imgurl": "../img/3dImg/right1.png",
            "opacity": 1,
            "canvasSkin": {
                "cwidth": 1024,
                "cheight": 128,
                "cwNub": 16,
                "chNub": 16,
                "cMarginW": 0.2,
                "cMarginH": 0.2,
                "speed": 4,
                "fps": 40,
                "direction": "w",
                "forward": "f",
                "side": 2,
                "run": true,
                "bgcolor": "rgba(0, 108, 249, 0.12)"
            }
        },
        "segments": 5,
        "radialSegments": 2,
        "closed": false,
        "radius": 200,
        "showSortNub": 20000,
        "customType1": "",
        "customType2": "",
        "animation": null,
        "dbclickEvents": null,
        "BindDevId": null,
        "BindDevName": null,
        "devInfo": null,
        "BindMeteId": null,
        "BindMeteName": null
    },
    {
        "show": false,
        "uuid": "",
        "name": "DCR01_airConditionMain_2_wind",  //
        "objType": "flowTube",
        "points": [{
            "x": 0,
            "y": 0,
            "z": 0
        }, {
            "x": 0,
            "y": 50,
            "z": 100
        }, {
            "x": 0,
            "y": 50,
            "z": 400
        }],
        "position": {
            "x": 1045.791,
            "y": 378.066,
            "z": -270.816
        },
        "scale": {
            "x": 1,
            "y": 1,
            "z": 1
        },
        "rotation": [{
            "direction": "x",
            "degree": 0
        }, {
            "direction": "y",
            "degree": -Math.PI / 2
        }, {
            "direction": "z",
            "degree": 0
        }],
        "style": {
            "skinColor": 16772846,
            "imgurl": "../img/3dImg/right1.png",
            "opacity": 1,
            "canvasSkin": {
                "cwidth": 1024,
                "cheight": 128,
                "cwNub": 16,
                "chNub": 16,
                "cMarginW": 0.2,
                "cMarginH": 0.2,
                "speed": 4,
                "fps": 40,
                "direction": "w",
                "forward": "f",
                "side": 2,
                "run": true,
                "bgcolor": "rgba(0, 108, 249, 0.12)"
            }
        },
        "segments": 5,
        "radialSegments": 2,
        "closed": false,
        "radius": 200,
        "showSortNub": 20000,
        "customType1": "",
        "customType2": "",
        "animation": null,
        "dbclickEvents": null,
        "BindDevId": null,
        "BindDevName": null,
        "devInfo": null,
        "BindMeteId": null,
        "BindMeteName": null
    }, {
        "show": false,
        "uuid": "",
        "name": "TCL_line_cube_1", // 机柜排线管理
        "objType": "cube2",
        "length": 120,
        "width": 1105,
        "height": 20,
        "x": 475,
        "y": 420,
        "z": 250,
        "style": {
            "skinColor": 16777215,
            "skin": {
                "skin_up": {
                    "skinColor": 16777215,
                    "side": 0,
                    "opacity": 1
                },
                "skin_down": {
                    "skinColor": 2580374,
                    "side": 0,
                    "opacity": 1,
                    "imgurl": "../img/3dImg/back.png",
                    "repeatx": true,
                    "width": 1,
                    "repeaty": true,
                    "height": 10
                },
                "skin_fore": {
                    "skinColor": 3374847,
                    "side": 2,
                    "opacity": 1
                },
                "skin_behind": {
                    "skinColor": 3374847,
                    "side": 2,
                    "opacity": 1
                },
                "skin_left": {
                    "skinColor": 3374847,
                    "side": 0,
                    "opacity": 1
                },
                "skin_right": {
                    "skinColor": 3374847,
                    "side": 0,
                    "opacity": 1
                }
            }
        },
        "showSortNub": 20005,
        "customType1": "",
        "customType2": "",
        "animation": null,
        "dbclickEvents": null,
        "rotation": [{
            "direction": "x",
            "degree": 0
        }, {
            "direction": "y",
            "degree": 0
        }, {
            "direction": "z",
            "degree": 0
        }],
        "thick": null,
        "scale": {
            "x": 1,
            "y": 1,
            "z": 1
        },
        "BindDevId": null,
        "BindDevName": null,
        "devInfo": null,
        "BindMeteId": null,
        "BindMeteName": null
    }, {
        "show": false,
        "uuid": "",
        "name": "TCL_line_cube_2", // 机柜排线管理
        "objType": "cube2",
        "length": 120,
        "width": 1105,
        "height": 20,
        "x": 25,
        "y": 420,
        "z": 250,
        "style": {
            "skinColor": 16777215,
            "skin": {
                "skin_up": {
                    "skinColor": 16777215,
                    "side": 0,
                    "opacity": 1
                },
                "skin_down": {
                    "skinColor": 2580374,
                    "side": 0,
                    "opacity": 1,
                    "imgurl": "../img/3dImg/back.png",
                    "repeatx": true,
                    "width": 1,
                    "repeaty": true,
                    "height": 10
                },
                "skin_fore": {
                    "skinColor": 3374847,
                    "side": 2,
                    "opacity": 1
                },
                "skin_behind": {
                    "skinColor": 3374847,
                    "side": 2,
                    "opacity": 1
                },
                "skin_left": {
                    "skinColor": 3374847,
                    "side": 0,
                    "opacity": 1
                },
                "skin_right": {
                    "skinColor": 3374847,
                    "side": 0,
                    "opacity": 1
                }
            }
        },
        "showSortNub": 20005,
        "customType1": "",
        "customType2": "",
        "animation": null,
        "dbclickEvents": null,
        "rotation": [{
            "direction": "x",
            "degree": 0
        }, {
            "direction": "y",
            "degree": 0
        }, {
            "direction": "z",
            "degree": 0
        }],
        "thick": null,
        "scale": {
            "x": 1,
            "y": 1,
            "z": 1
        },
        "BindDevId": null,
        "BindDevName": null,
        "devInfo": null,
        "BindMeteId": null,
        "BindMeteName": null
    }, {
        "show": false,
        "uuid": "",
        "name": "TCL_line_cube_3", // 机柜排线管理
        "objType": "cube2",
        "length": 120,
        "width": 1105,
        "height": 20,
        "x": -425,
        "y": 420,
        "z": 250,
        "style": {
            "skinColor": 16777215,
            "skin": {
                "skin_up": {
                    "skinColor": 16777215,
                    "side": 0,
                    "opacity": 1
                },
                "skin_down": {
                    "skinColor": 2580374,
                    "side": 0,
                    "opacity": 1,
                    "imgurl": "../img/3dImg/back.png",
                    "repeatx": true,
                    "width": 1,
                    "repeaty": true,
                    "height": 10
                },
                "skin_fore": {
                    "skinColor": 3374847,
                    "side": 2,
                    "opacity": 1
                },
                "skin_behind": {
                    "skinColor": 3374847,
                    "side": 2,
                    "opacity": 1
                },
                "skin_left": {
                    "skinColor": 3374847,
                    "side": 0,
                    "opacity": 1
                },
                "skin_right": {
                    "skinColor": 3374847,
                    "side": 0,
                    "opacity": 1
                }
            }
        },
        "showSortNub": 20005,
        "customType1": "",
        "customType2": "",
        "animation": null,
        "dbclickEvents": null,
        "rotation": [{
            "direction": "x",
            "degree": 0
        }, {
            "direction": "y",
            "degree": 0
        }, {
            "direction": "z",
            "degree": 0
        }],
        "thick": null,
        "scale": {
            "x": 1,
            "y": 1,
            "z": 1
        },
        "BindDevId": null,
        "BindDevName": null,
        "devInfo": null,
        "BindMeteId": null,
        "BindMeteName": null
    }, {
        "show": false,
        "uuid": "",
        "name": "TCL_line_cube_4", // 机柜排线管理
        "objType": "cube2",
        "length": 120,
        "width": 1105,
        "height": 20,
        "x": -875,
        "y": 420,
        "z": 250,
        "style": {
            "skinColor": 16777215,
            "skin": {
                "skin_up": {
                    "skinColor": 16777215,
                    "side": 0,
                    "opacity": 1
                },
                "skin_down": {
                    "skinColor": 2580374,
                    "side": 0,
                    "opacity": 1,
                    "imgurl": "../img/3dImg/back.png",
                    "repeatx": true,
                    "width": 1,
                    "repeaty": true,
                    "height": 10
                },
                "skin_fore": {
                    "skinColor": 3374847,
                    "side": 2,
                    "opacity": 1
                },
                "skin_behind": {
                    "skinColor": 3374847,
                    "side": 2,
                    "opacity": 1
                },
                "skin_left": {
                    "skinColor": 3374847,
                    "side": 0,
                    "opacity": 1
                },
                "skin_right": {
                    "skinColor": 3374847,
                    "side": 0,
                    "opacity": 1
                }
            }
        },
        "showSortNub": 20005,
        "customType1": "",
        "customType2": "",
        "animation": null,
        "dbclickEvents": null,
        "rotation": [{
            "direction": "x",
            "degree": 0
        }, {
            "direction": "y",
            "degree": 0
        }, {
            "direction": "z",
            "degree": 0
        }],
        "thick": null,
        "scale": {
            "x": 1,
            "y": 1,
            "z": 1
        },
        "BindDevId": null,
        "BindDevName": null,
        "devInfo": null,
        "BindMeteId": null,
        "BindMeteName": null
    }, {
        "show": false,
        "uuid": "",
        "name": "TCL_line_1_1",
        "objType": "tube",
        "points": [{
            "x": 0,
            "y": 0,
            "z": -544
        }, {
            "x": 0,
            "y": 0,
            "z": 202
        }, {
            "x": 0,
            "y": 0,
            "z": 560
        }],
        "position": {
            "x": 475.179,
            "y": 420.485,
            "z": 250
        },
        "scale": {
            "x": 1,
            "y": 1,
            "z": 1
        },
        "rotation": [{
            "direction": "x",
            "degree": 0
        }, {
            "direction": "y",
            "degree": 0
        }, {
            "direction": "z",
            "degree": 0
        }],
        "style": {
            "skinColor": 3407796,
            "imgurl": "../img/3dImg/water.jpg",
            "side": 2,
            "opacity": 1
        },
        "segments": 5,
        "radialSegments": 8,
        "closed": false,
        "radius": 5,
        "showSortNub": 58,
        "customType1": "",
        "customType2": "",
        "animation": null,
        "dbclickEvents": null,
        "BindDevId": null,
        "BindDevName": null,
        "devInfo": null,
        "BindMeteId": null,
        "BindMeteName": null
    }, {
        "show": false,
        "uuid": "",
        "name": "TCL_line_1_2",
        "objType": "tube",
        "points": [{
            "x": 0,
            "y": 0,
            "z": -544
        }, {
            "x": 0,
            "y": 0,
            "z": 202
        }, {
            "x": 0,
            "y": 0,
            "z": 560
        }],
        "position": {
            "x": 450.179,
            "y": 420.485,
            "z": 250
        },
        "scale": {
            "x": 1,
            "y": 1,
            "z": 1
        },
        "rotation": [{
            "direction": "x",
            "degree": 0
        }, {
            "direction": "y",
            "degree": 0
        }, {
            "direction": "z",
            "degree": 0
        }],
        "style": {
            "skinColor": 16774912,
            "imgurl": "../img/3dImg/water.jpg",
            "side": 2,
            "opacity": 1
        },
        "segments": 5,
        "radialSegments": 8,
        "closed": false,
        "radius": 5,
        "showSortNub": 58,
        "customType1": "",
        "customType2": "",
        "animation": null,
        "dbclickEvents": null,
        "BindDevId": null,
        "BindDevName": null,
        "devInfo": null,
        "BindMeteId": null,
        "BindMeteName": null
    }, {
        "show": false,
        "uuid": "",
        "name": "TCL_line_1_3",
        "objType": "tube",
        "points": [{
            "x": 0,
            "y": 0,
            "z": -544
        }, {
            "x": 0,
            "y": 0,
            "z": 202
        }, {
            "x": 0,
            "y": 0,
            "z": 560
        }],
        "position": {
            "x": 500.179,
            "y": 420.485,
            "z": 250
        },
        "scale": {
            "x": 1,
            "y": 1,
            "z": 1
        },
        "rotation": [{
            "direction": "x",
            "degree": 0
        }, {
            "direction": "y",
            "degree": 0
        }, {
            "direction": "z",
            "degree": 0
        }],
        "style": {
            "skinColor": 10879490,
            "imgurl": "../img/3dImg/water.jpg",
            "side": 2,
            "opacity": 1
        },
        "segments": 5,
        "radialSegments": 8,
        "closed": false,
        "radius": 5,
        "showSortNub": 58,
        "customType1": "",
        "customType2": "",
        "animation": null,
        "dbclickEvents": null,
        "BindDevId": null,
        "BindDevName": null,
        "devInfo": null,
        "BindMeteId": null,
        "BindMeteName": null
    },
    {
        "show": false,
        "uuid": "",
        "name": "TCL_line_2_1",
        "objType": "tube",
        "points": [{
            "x": 0,
            "y": 0,
            "z": -544
        }, {
            "x": 0,
            "y": 0,
            "z": 202
        }, {
            "x": 0,
            "y": 0,
            "z": 560
        }],
        "position": {
            "x": 25.179,
            "y": 420.485,
            "z": 250
        },
        "scale": {
            "x": 1,
            "y": 1,
            "z": 1
        },
        "rotation": [{
            "direction": "x",
            "degree": 0
        }, {
            "direction": "y",
            "degree": 0
        }, {
            "direction": "z",
            "degree": 0
        }],
        "style": {
            "skinColor": 3407796,
            "imgurl": "../img/3dImg/water.jpg",
            "side": 2,
            "opacity": 1
        },
        "segments": 5,
        "radialSegments": 8,
        "closed": false,
        "radius": 5,
        "showSortNub": 58,
        "customType1": "",
        "customType2": "",
        "animation": null,
        "dbclickEvents": null,
        "BindDevId": null,
        "BindDevName": null,
        "devInfo": null,
        "BindMeteId": null,
        "BindMeteName": null
    }, {
        "show": false,
        "uuid": "",
        "name": "TCL_line_2_2",
        "objType": "tube",
        "points": [{
            "x": 0,
            "y": 0,
            "z": -544
        }, {
            "x": 0,
            "y": 0,
            "z": 202
        }, {
            "x": 0,
            "y": 0,
            "z": 560
        }],
        "position": {
            "x": 0.179,
            "y": 420.485,
            "z": 250
        },
        "scale": {
            "x": 1,
            "y": 1,
            "z": 1
        },
        "rotation": [{
            "direction": "x",
            "degree": 0
        }, {
            "direction": "y",
            "degree": 0
        }, {
            "direction": "z",
            "degree": 0
        }],
        "style": {
            "skinColor": 16774912,
            "imgurl": "../img/3dImg/water.jpg",
            "side": 2,
            "opacity": 1
        },
        "segments": 5,
        "radialSegments": 8,
        "closed": false,
        "radius": 5,
        "showSortNub": 58,
        "customType1": "",
        "customType2": "",
        "animation": null,
        "dbclickEvents": null,
        "BindDevId": null,
        "BindDevName": null,
        "devInfo": null,
        "BindMeteId": null,
        "BindMeteName": null
    }, {
        "show": false,
        "uuid": "",
        "name": "TCL_line_2_3",
        "objType": "tube",
        "points": [{
            "x": 0,
            "y": 0,
            "z": -544
        }, {
            "x": 0,
            "y": 0,
            "z": 202
        }, {
            "x": 0,
            "y": 0,
            "z": 560
        }],
        "position": {
            "x": 50.179,
            "y": 420.485,
            "z": 250
        },
        "scale": {
            "x": 1,
            "y": 1,
            "z": 1
        },
        "rotation": [{
            "direction": "x",
            "degree": 0
        }, {
            "direction": "y",
            "degree": 0
        }, {
            "direction": "z",
            "degree": 0
        }],
        "style": {
            "skinColor": 10879490,
            "imgurl": "../img/3dImg/water.jpg",
            "side": 2,
            "opacity": 1
        },
        "segments": 5,
        "radialSegments": 8,
        "closed": false,
        "radius": 5,
        "showSortNub": 58,
        "customType1": "",
        "customType2": "",
        "animation": null,
        "dbclickEvents": null,
        "BindDevId": null,
        "BindDevName": null,
        "devInfo": null,
        "BindMeteId": null,
        "BindMeteName": null
    },
    {
        "show": false,
        "uuid": "",
        "name": "TCL_line_3_1",
        "objType": "tube",
        "points": [{
            "x": 0,
            "y": 0,
            "z": -544
        }, {
            "x": 0,
            "y": 0,
            "z": 202
        }, {
            "x": 0,
            "y": 0,
            "z": 560
        }],
        "position": {
            "x": -425.179,
            "y": 420.485,
            "z": 250
        },
        "scale": {
            "x": 1,
            "y": 1,
            "z": 1
        },
        "rotation": [{
            "direction": "x",
            "degree": 0
        }, {
            "direction": "y",
            "degree": 0
        }, {
            "direction": "z",
            "degree": 0
        }],
        "style": {
            "skinColor": 3407796,
            "imgurl": "../img/3dImg/water.jpg",
            "side": 2,
            "opacity": 1
        },
        "segments": 5,
        "radialSegments": 8,
        "closed": false,
        "radius": 5,
        "showSortNub": 58,
        "customType1": "",
        "customType2": "",
        "animation": null,
        "dbclickEvents": null,
        "BindDevId": null,
        "BindDevName": null,
        "devInfo": null,
        "BindMeteId": null,
        "BindMeteName": null
    }, {
        "show": false,
        "uuid": "",
        "name": "TCL_line_3_2",
        "objType": "tube",
        "points": [{
            "x": 0,
            "y": 0,
            "z": -544
        }, {
            "x": 0,
            "y": 0,
            "z": 202
        }, {
            "x": 0,
            "y": 0,
            "z": 560
        }],
        "position": {
            "x": -450.179,
            "y": 420.485,
            "z": 250
        },
        "scale": {
            "x": 1,
            "y": 1,
            "z": 1
        },
        "rotation": [{
            "direction": "x",
            "degree": 0
        }, {
            "direction": "y",
            "degree": 0
        }, {
            "direction": "z",
            "degree": 0
        }],
        "style": {
            "skinColor": 16774912,
            "imgurl": "../img/3dImg/water.jpg",
            "side": 2,
            "opacity": 1
        },
        "segments": 5,
        "radialSegments": 8,
        "closed": false,
        "radius": 5,
        "showSortNub": 58,
        "customType1": "",
        "customType2": "",
        "animation": null,
        "dbclickEvents": null,
        "BindDevId": null,
        "BindDevName": null,
        "devInfo": null,
        "BindMeteId": null,
        "BindMeteName": null
    }, {
        "show": false,
        "uuid": "",
        "name": "TCL_line_3_3",
        "objType": "tube",
        "points": [{
            "x": 0,
            "y": 0,
            "z": -544
        }, {
            "x": 0,
            "y": 0,
            "z": 202
        }, {
            "x": 0,
            "y": 0,
            "z": 560
        }],
        "position": {
            "x": -400.179,
            "y": 420.485,
            "z": 250
        },
        "scale": {
            "x": 1,
            "y": 1,
            "z": 1
        },
        "rotation": [{
            "direction": "x",
            "degree": 0
        }, {
            "direction": "y",
            "degree": 0
        }, {
            "direction": "z",
            "degree": 0
        }],
        "style": {
            "skinColor": 10879490,
            "imgurl": "../img/3dImg/water.jpg",
            "side": 2,
            "opacity": 1
        },
        "segments": 5,
        "radialSegments": 8,
        "closed": false,
        "radius": 5,
        "showSortNub": 58,
        "customType1": "",
        "customType2": "",
        "animation": null,
        "dbclickEvents": null,
        "BindDevId": null,
        "BindDevName": null,
        "devInfo": null,
        "BindMeteId": null,
        "BindMeteName": null
    },
    {
        "show": false,
        "uuid": "",
        "name": "TCL_line_4_1",
        "objType": "tube",
        "points": [{
            "x": 0,
            "y": 0,
            "z": -544
        }, {
            "x": 0,
            "y": 0,
            "z": 202
        }, {
            "x": 0,
            "y": 0,
            "z": 560
        }],
        "position": {
            "x": -875.179,
            "y": 420.485,
            "z": 250
        },
        "scale": {
            "x": 1,
            "y": 1,
            "z": 1
        },
        "rotation": [{
            "direction": "x",
            "degree": 0
        }, {
            "direction": "y",
            "degree": 0
        }, {
            "direction": "z",
            "degree": 0
        }],
        "style": {
            "skinColor": 3407796,
            "imgurl": "../img/3dImg/water.jpg",
            "side": 2,
            "opacity": 1
        },
        "segments": 5,
        "radialSegments": 8,
        "closed": false,
        "radius": 5,
        "showSortNub": 58,
        "customType1": "",
        "customType2": "",
        "animation": null,
        "dbclickEvents": null,
        "BindDevId": null,
        "BindDevName": null,
        "devInfo": null,
        "BindMeteId": null,
        "BindMeteName": null
    }, {
        "show": false,
        "uuid": "",
        "name": "TCL_line_4_2",
        "objType": "tube",
        "points": [{
            "x": 0,
            "y": 0,
            "z": -544
        }, {
            "x": 0,
            "y": 0,
            "z": 202
        }, {
            "x": 0,
            "y": 0,
            "z": 560
        }],
        "position": {
            "x": -900.179,
            "y": 420.485,
            "z": 250
        },
        "scale": {
            "x": 1,
            "y": 1,
            "z": 1
        },
        "rotation": [{
            "direction": "x",
            "degree": 0
        }, {
            "direction": "y",
            "degree": 0
        }, {
            "direction": "z",
            "degree": 0
        }],
        "style": {
            "skinColor": 16774912,
            "imgurl": "../img/3dImg/water.jpg",
            "side": 2,
            "opacity": 1
        },
        "segments": 5,
        "radialSegments": 8,
        "closed": false,
        "radius": 5,
        "showSortNub": 58,
        "customType1": "",
        "customType2": "",
        "animation": null,
        "dbclickEvents": null,
        "BindDevId": null,
        "BindDevName": null,
        "devInfo": null,
        "BindMeteId": null,
        "BindMeteName": null
    }, {
        "show": false,
        "uuid": "",
        "name": "TCL_line_4_3",
        "objType": "tube",
        "points": [{
            "x": 0,
            "y": 0,
            "z": -544
        }, {
            "x": 0,
            "y": 0,
            "z": 202
        }, {
            "x": 0,
            "y": 0,
            "z": 560
        }],
        "position": {
            "x": -850.179,
            "y": 420.485,
            "z": 250
        },
        "scale": {
            "x": 1,
            "y": 1,
            "z": 1
        },
        "rotation": [{
            "direction": "x",
            "degree": 0
        }, {
            "direction": "y",
            "degree": 0
        }, {
            "direction": "z",
            "degree": 0
        }],
        "style": {
            "skinColor": 10879490,
            "imgurl": "../img/3dImg/water.jpg",
            "side": 2,
            "opacity": 1
        },
        "segments": 5,
        "radialSegments": 8,
        "closed": false,
        "radius": 5,
        "showSortNub": 58,
        "customType1": "",
        "customType2": "",
        "animation": null,
        "dbclickEvents": null,
        "BindDevId": null,
        "BindDevName": null,
        "devInfo": null,
        "BindMeteId": null,
        "BindMeteName": null
    },
    ];

    // 添加机柜 
    for (var i = 1; i <= 6; i++) {
        var showface = -1;
        if (i == 6) {
            showface = 0;
        }
        var _cab = getCabinetModel("DCR01_cab_A_" + i,   // 获取机柜静态模型
            { x: 1, y: 1, z: 1 },
            { "x": 475, "y": 210, "z": -60 + (i - 1) * 155 }, [{ "direction": "y", "degree": Math.PI }], showface, roomName);
        models.push(_cab);
        var _cabinet = wtserverAPI.CabinetBoxHandlerCacheData["c_" + roomName + "_" + "DCR01_cab_A_" + i];
        var devsNubs = 0;
        if (_cabinet && _cabinet.devChildren) {
            devsNubs = _cabinet.devChildren.length;
        }
        if (devsNubs > 0) {
            var serversGroup = getServerModel("DCR01_cab_A_" + i + "_sGroup", 0, { "x": 475, "y": 210, "z": -60 + (i - 1) * 155 }, { x: 1, y: 1, z: 1 }, Math.PI); // 给有设备的机柜贴图?
            models.push(serversGroup);
        }
    }

    models.push(getCabinetModel("DCR01_cab_A_26",   // 获取机柜静态模型  MF
        { x: 1, y: 1, z: 1 },
        { "x": 475, "y": 210, "z": -215 }, [{ "direction": "y", "degree": Math.PI }], 1, roomName));

    models.push(getCabinetModel("DCR01_cab_A_27",   // 获取机柜静态模型
        { x: 1, y: 1, z: 1 },
        { "x": 25, "y": 210, "z": -215 }, [{ "direction": "y", "degree": Math.PI }], 1, roomName));

    for (var i = 1; i <= 6; i++) {
        var showface = -1;
        if (i == 6) {
            showface = 0;
        }
        var _cab = getCabinetModel("DCR01_cab_A_" + (i + 6),   // 获取机柜静态模型
            { x: 1, y: 1, z: 1 },
            { "x": 25, "y": 210, "z": -60 + (i - 1) * 155 }, [{ "direction": "y", "degree": Math.PI }], showface, roomName);
        models.push(_cab);
        var _cabinet = wtserverAPI.CabinetBoxHandlerCacheData["c_" + roomName + "_" + "DCR01_cab_A_" + (i + 6)];
        var devsNubs = 0;
        if (_cabinet && _cabinet.devChildren) {
            devsNubs = _cabinet.devChildren.length;
        }
        if (devsNubs > 0) {
            var serversGroup = getServerModel("DCR01_cab_A_" + i + "_sGroup", 0, { "x": 25, "y": 210, "z": -60 + (i - 1) * 155 }, { x: 1, y: 1, z: 1 }, Math.PI); // 给有设备的机柜贴图?
            models.push(serversGroup);
        }
    }

    for (var i = 1; i <= 6; i++) {
        var showface = -1;
        if (i == 1) {
            showface = 1;
        } else if (i == 6) {
            showface = 0;
        }
        var _cab = getCabinetModel("DCR01_cab_A_" + (i + 12),   // 获取机柜静态模型
            { x: 1, y: 1, z: 1 },
            { "x": -435, "y": 210, "z": -60 + (i - 1) * 155 }, [{ "direction": "y", "degree": Math.PI }], showface, roomName);
        models.push(_cab);
        var _cabinet = wtserverAPI.CabinetBoxHandlerCacheData["c_" + roomName + "_" + "DCR01_cab_A_" + (i + 12)];
        var devsNubs = 0;
        if (_cabinet && _cabinet.devChildren) {
            devsNubs = _cabinet.devChildren.length;
        }
        if (devsNubs > 0) {
            var serversGroup = getServerModel("DCR01_cab_A_" + i + "_sGroup", 0, { "x": -425, "y": 210, "z": -60 + (i - 1) * 155 }, { x: 1, y: 1, z: 1 }, Math.PI); // 给有设备的机柜贴图?
            models.push(serversGroup);
        }
    }

    for (var i = 1; i <= 7; i++) {
        var showface = -1;
        if (i == 1) {
            showface = 1;
        } else if (i == 7) {
            showface = 0;
        }
        var _cab = getCabinetModel("DCR01_cab_A_" + (i + 18),   // 获取机柜静态模型
            { x: 1, y: 1, z: 1 },
            { "x": -890, "y": 210, "z": -215 + (i - 1) * 155 }, [{ "direction": "y", "degree": Math.PI }], showface, roomName);
        models.push(_cab);
        var _cabinet = wtserverAPI.CabinetBoxHandlerCacheData["c_" + roomName + "_" + "DCR01_cab_A_" + (i + 18)];
        var devsNubs = 0;
        if (_cabinet && _cabinet.devChildren) {
            devsNubs = _cabinet.devChildren.length;
        }
        if (devsNubs > 0) {
            var serversGroup = getServerModel("DCR01_cab_A_" + i + "_sGroup", 0, { "x": -890, "y": 210, "z": -215 + (i - 1) * 155 }, { x: 1, y: 1, z: 1 }, Math.PI); // 给有设备的机柜贴图?
            models.push(serversGroup);
        }
    }

    //优化模型 MF>这样怎么就优化了模型
    var oldobjnames = [];
    for (var i = 1; i <= 27; i++) {
        oldobjnames.push("DCR01_cab_A_" + i);
    }
    models.push({
        show: true,
        objType: "MergeModels",
        oldObjNames: oldobjnames
    });
View Code

 

b、实现不规则机房建模

下面是环境场景多的情况下 建立的模型

我们推进摄像机 展示一个局部的模型情况

画中画效果 在3D模型内展示视频 或者电脑桌面 或其它

c、微模块机房建模(下节课重点讲述)

d、综合机房(含有微模块与普通机柜)

二、鼠标滑过机柜,显示机柜概要信息

 三、双击机柜,显示机柜详情

四、打开机柜门 显示机柜内部服务器详细信息

五、机柜利用率展示

代码实现:

//cabnames 表示名称
ModelBussiness.prototype.showSpaceRate = function () {
    var _this = this;
    var cabnames = wtserverAPI.cabNames;
    if (_this.rateSpaceState == 0) {
        _this.rateSpaceState = 1;
        $("#backBtn").fadeIn();
        layer.closeAll();
        $("#toolbar").fadeOut();
        //隐藏所有
        _this.hideAllCabinet("aaaa", function () {
            if (_this.rateSpaceCubeNames.length <= 0) {    //获取利用率
                var loadindex = layer.load();
                wtserverAPI.CabRate(modelBussiness.roomName, function (result) {
                    layer.closeAll();
                    console.log(result);
                    var cabRates = {};
                    if (result && result.length && result.length > 0) {
                        $.each(result, function (_index, _obj) {
                            var _cab = wtserverAPI.getCabinetByUUID(modelBussiness.roomName, _obj.cabid);
                            if (_cab && _cab.cabName) {
                                cabRates[_cab.cabName] = _obj.useRate;
                            }
                        });
                    }
                    console.log(cabRates);
                    for (var i = 0; i < cabnames.length; i++) {
                        var itcobj = WT3DObj.commonFunc.findObject(cabnames[i]);
                        var rateValue = 0;
                        if (cabRates[cabnames[i]]) {
                            rateValue = cabRates[cabnames[i]];
                        }
                        var style = {
                            borderColor: 0xffffff,
                            innerColor: 0x6495ed,
                            innerOprity: 1,
                            outColor: 0xffffff,
                            outOprity: 0.1
                        };
                      

                        _this.commonFunc.createRateCube(cabnames[i],
                            { x: 160, y: 380, z: 140 },
                            { x: itcobj.position.x, y: itcobj.position.y, z: itcobj.position.z },
                            { x: 0, y: 0, z: 0 },
                            rateValue,
                            style, { timelong: 1000 });
                    }
                }, function (err) {
                    layer.closeAll();
                    var cabRates = {};
                    //if (result && result.length && result.length > 0) {
                    //    $.each(result, function (_index, _obj) {
                    //        var _cab = wtserverAPI.getCabinetByUUID(modelBussiness.roomName, _obj.cabid);
                    //        if (_cab && _cab.cabName) {
                    //            cabRates[_cab.cabName] = _obj.useRate;
                    //        }
                    //    });
                    //}
                    console.log(cabRates);
                    for (var i = 0; i < cabnames.length; i++) {
                        var itcobj = WT3DObj.commonFunc.findObject(cabnames[i]);
                        var rateValue = 0;
                        if (cabRates[cabnames[i]]) {
                            rateValue = cabRates[cabnames[i]];
                        }
                        var style = {
                            borderColor: 0xffffff,
                            innerColor: 0x6495ed,
                            innerOprity: 1,
                            outColor: 0xffffff,
                            outOprity: 0.1
                        };
                     

                        _this.commonFunc.createRateCube(cabnames[i],
                            { x: 160, y: 380, z: 140 },
                            { x: itcobj.position.x, y: itcobj.position.y, z: itcobj.position.z },
                            { x: 0, y: 0, z: 0 },
                            rateValue,
                            style, { timelong: 1000 });
                    }
                });
            }
            else {

                for (var i = 0; i < cabnames.length; i++) {
                    var rateValue = Math.random();
                    var style = {
                        borderColor: 0xffffff,
                        innerColor: 0x6495ed,
                        innerOprity: 1,
                        outColor: 0xffffff,
                        outOprity: 0.1
                    };
                    var itcobj = WT3DObj.commonFunc.findObject(cabnames[i]);
                    _this.commonFunc.createRateCube(cabnames[i],
                        { x: 160, y: 380, z: 140 },
                        { x: itcobj.position.x, y: itcobj.position.y, z: itcobj.position.z },
                        { x: 0, y: 0, z: 0 },
                        rateValue,
                        style, { timelong: 1000 });
                }
            }
        });
    }
    else {
        _this.hideSpaceRate();
        if (_this.needHideCabinets.length > 0) {
            WT3DObj.commonFunc.changeCameraPosition({ x: 2531, y: 3967, z: -1150 }, { x: -615, y: 0, z: -35 }, 1000, function () {
                $.each(_this.needHideCabinets, function (_index, _obj) {
                    if (_obj.name.indexOf("_rate_") < 0 && _obj.name.indexOf("_yearCube_") < 0) {
                        _obj.visible = true;
                    }
                });
            });
        }
    }
}

  

六、机柜可用控件展示

代码实现:

MSS.prototype.showUsageMap_old = function () {
    var _this = this;

    //WT3DObj.commonFunc.changeCameraPosition({ x: 3626.8806598704978, y: 2503.5840662851847, z: 1333.887505251365 }, { x: 115.96408129332937, y: 178.8991280155388, z: 368.1924201030766 },1000, function () { });
    if (_this.agesSpaceState == 0) {
        _this.agesSpaceState = 1;
        $("#backBtn").fadeIn();
        layer.closeAll();
        $("#toolbar").fadeOut();
        //隐藏所有
        _this.hideAllCabinet("aaaa", function () {

            if (_this.agesSpaceCubeNames.length <= 0) {

                var loadindex = layer.load();
                wtserverAPI.FreeSpace(modelBussiness.roomName, function (result) {
                    layer.closeAll();
                    console.log(result);
                    var cabNoUse = {};
                    if (result && result.length && result.length > 0) {
                        $.each(result, function (_index, _obj) {
                            var _cab = wtserverAPI.getCabinetByUUID(modelBussiness.roomName, _obj.cabid);
                            if (_cab && _cab.cabName) {
                                var ageValue = [];
                                if (_obj.uPositionUsed && _obj.uPositionUsed.length && _obj.uPositionUsed.length > 0) {
                                    for (var j = 0; j < _obj.uPositionUsed.length - 1; j++) {
                                        if (j == 0) {
                                            ageValue.push({
                                                value: 1,
                                                max: _obj.uPositionUsed[0],
                                                min: _obj.uPositionUsed[0]
                                            });
                                        }
                                        if (_obj.uPositionUsed[j + 1] - _obj.uPositionUsed[j] > 1) {
                                            ageValue.push({
                                                value: 1,
                                                max: _obj.uPositionUsed[j + 1],
                                                min: _obj.uPositionUsed[j + 1]
                                            });
                                        } else {
                                            ageValue[ageValue.length - 1].max = _obj.uPositionUsed[j + 1];
                                        }
                                    }
                                }
                                cabNoUse[_cab.cabName] = ageValue;
                            }
                        });
                    }
                    console.log(cabNoUse);
                    for (var i = 1; i <= 49; i++) {
                        var itcobj = WT3DObj.commonFunc.findObject(modelBussiness.roomName + "_cab_A_" + i);
                        var ageValue = [];
                        if (cabNoUse[modelBussiness.roomName + "_cab_A_" + i]) {
                            ageValue = cabNoUse[modelBussiness.roomName + "_cab_A_" + i];
                        }


                        var style = {
                            borderColor: 0x444444,
                            outColor: 0xffffff,
                            outOprity: 0.1
                        };
                        _this.commonFunc.createUseageCube(modelBussiness.roomName + "_cab_A_" + i,
                            { x: 160, y: 380, z: 140 },
                            { x: itcobj.position.x, y: itcobj.position.y, z: itcobj.position.z },
                            { x: 0, y: 0, z: 0 },
                            ageValue,
                            style, { timelong: 1000 }, i);

                    }
                    for (var i = 1; i <= 48; i++) {
                        var itcobj = WT3DObj.commonFunc.findObject(modelBussiness.roomName + "_cab_B_" + i);
                        var ageValue = [];
                        if (cabNoUse[modelBussiness.roomName + "_cab_B_" + i]) {
                            ageValue = cabNoUse[modelBussiness.roomName + "_cab_B_" + i];
                        }

                        var style = {
                            borderColor: 0x444444,
                            outColor: 0xffffff,
                            outOprity: 0.1
                        };
                        var itcobj = WT3DObj.commonFunc.findObject(modelBussiness.roomName + "_cab_B_" + i);
                        _this.commonFunc.createUseageCube(modelBussiness.roomName + "_cab_B_" + i,
                            { x: 160, y: 380, z: 140 },
                            { x: itcobj.position.x, y: itcobj.position.y, z: itcobj.position.z },
                            { x: 0, y: 0, z: 0 },
                            ageValue,
                            style, { timelong: 1000 }, i);

                    }
                }, function () {
                    layer.closeAll();
                    layer.msg("数据接口异常,查无数据!");
                });
            }
            else {
                for (var i = 1; i <= 49; i++) {
                    var itcobj = WT3DObj.commonFunc.findObject(modelBussiness.roomName + "_cab_A_" + i);
                    var ageValue = [];
                    var style = {
                        borderColor: 0xffffff,
                        outColor: 0xffffff,
                        outOprity: 0.1
                    };
                    _this.commonFunc.createUseageCube(modelBussiness.roomName + "_cab_A_" + i,
                        { x: 160, y: 378, z: 140 },
                        { x: itcobj.position.x, y: itcobj.position.y, z: itcobj.position.z },
                        { x: 0, y: 0, z: 0 },
                        ageValue,
                        style, { timelong: 1000 }, i);
                }
                for (var i = 1; i <= 48; i++) {
                    var itcobj = WT3DObj.commonFunc.findObject(modelBussiness.roomName + "_cab_B_" + i);
                    var ageValue = [];
                    var style = {
                        borderColor: 0xffffff,
                        outColor: 0xffffff,
                        outOprity: 0.1
                    };
                    _this.commonFunc.createUseageCube(modelBussiness.roomName + "_cab_B_" + i,
                        { x: 160, y: 378, z: 140 },
                        { x: itcobj.position.x, y: itcobj.position.y, z: itcobj.position.z },
                        { x: 0, y: 0, z: 0 },
                        ageValue,
                        style, { timelong: 1000 }, i);
                }
            }

        });
    } else {
        this.hideUsageSpaceRate();
        if (_this.needHideCabinets.length > 0) {
            WT3DObj.commonFunc.changeCameraPosition({ x: 2531, y: 3967, z: -1150 }, { x: -615, y: 0, z: -35 }, 1000, function () {
                $.each(_this.needHideCabinets, function (_index, _obj) {
                    if (_obj.name.indexOf("_rate_") < 0 && _obj.name.indexOf("_yearCube_") < 0) {
                        _obj.visible = true;
                    }
                });
            });
        }
    }
}

  

七、机房内排线 

八、机房温度云图展示

九、告警机柜展示

 烟雾告警模拟

十、空调通风

 

  二、数据对接代码实现

  

function WTServerAPI() { }

WTServerAPI.prototype.init = function () {
    
     
    this.alarmColors = {
        "灾难": "0xff0000",
        "警告": "0xff0000",
        "严重": "0xffff00",
        "一般": "0x00ff00",
        "经过": "0x00ffff",
    }
}
WTServerAPI.prototype.getAlarmColor = function (lstr) {
    return this.alarmColors[lstr] ? this.alarmColors[lstr] : "0xff0000";
}
WTServerAPI.prototype.roomId = function (key) {
    var keyValues = {
        ITC: "c12d7373-a6db-4a3f-96a0-f1a851a8825d",
        PCR: "dd01271f-7129-4ba1-afcb-fb2dd9017db9",
        DCR01: "b243a046-31f5-4ba4-891c-bd4e8368c0d9",
        DCR02: "d8de327b-6b11-4a18-b1d8-168ce0c06d4f",
        DCR03: "9c26ffd0-e9b1-40bb-8437-a74336c36d26",
        DCR04: "00a33071-252a-423e-891d-2d836ae23d00"
    };
    return keyValues[key];
}
WTServerAPI.prototype.startSigalrServer = function (callBack) {
    $.getScript(wtserverAPI.SignalrHubs, function () {
        $.connection.hub.url = wtserverAPI.SignalrUrl;
        var chat = $.connection.signalRHub;
        chat.client.Room3DAlert = function (res) {
            if (callBack) {
                callBack(res);
            }
        };
        //开始连接
        $.connection.hub.start().done(function () {
            // console.log("连接成功");
        }).fail(function () {
            // console.log("连接失败");
        });
    });
}
WTServerAPI.prototype.SigalrMsg = function (res) {
    var msg = JSON.parse(res);
    console.log(msg);
    if (msg) {
        if (msg.msgType && msg.msgType == "Room3DAlert") {
            if (modelBussiness) {
                modelBussiness.alarmServer(msg.message);
            }
        }
    }
}
/*
接口方式:get
返回格式: json
Url:服务端自定
参数:url?room={0}&cabinetNub={1}
参数说明:room代表机房编号,cabinetNub为机柜编号,当cabinetNub=-1时返回该机房所有服务器设备信息
接口方式:get
返回格式: json
Url:服务端自定
参数:
     action:  “cabInfo”                                      // 执行的方法
      roomID : “c12d7373-a6db-4a3f-96a0-f1a851a8825d”         // 机房ID,
     cabinetNub:  “ ”                                     // 机柜编号
参数说明:roomID代表机房编号,cabinetNub为机柜编号,当cabinetNub=-1时返回该机房所有服务器设备信息
返回格式(参考)
{
        "resultCode": "success",
        "error": {
            "errorCode": 0,
            "errorInfo": "此处显示错误信息"
        },
    "result":  [
        {
            "cabinetNub": "A1",
            "devChildren": [//这是一个数组 列表
                {
                    "devId": "",//设备id  这里面的id或者编号要用于数据绑定 要和数据库里面的设备id或者编号一致
                    "devCode": "",//设备编号   这里面的id或者编号要用于数据绑定 要和数据库里面的设备id或者编号一致
                    "devName": "",//设备名称
                    "devType": "",//前后端协定一些设备类型
                    "devURange": {//[5,8] 这里左闭 右闭区间
                        "min": 5,
                        "max":8
                    },
                    "devCustomSkin": {//自定义设备皮肤 可不填写
                        "topImg": "img地址",
                        "bottomImg": "img地址",
                        "foreImg": "img地址",
                        "behindImg": "img地址",
                        "leftImg": "img地址",
                        "rightImg": "img地址",
                    },
                },
                //.............此处表示更多
            ]
        },
         {
             "cabinetNub": "A2",
             "devChildren": [
                 {
                     "devId": "",//设备id  这里面的id或者编号要用于数据绑定 要和数据库里面的设备id或者编号一致
                     "devCode": "",//设备编号   这里面的id或者编号要用于数据绑定 要和数据库里面的设备id或者编号一致
                     "devName": "",//设备名称
                     "devType": "",//前后端协定一些设备类型
                     "devURange": {//[5,8] 这里左闭 右闭区间
                         "min": 5,
                         "max": 8
                     },
                     "devCustomSkin": {//自定义设备皮肤 可不填写
                         "topImg": "img地址",
                         "bottomImg": "img地址",
                         "foreImg": "img地址",
                         "behindImg": "img地址",
                         "leftImg": "img地址",
                         "rightImg": "img地址",
                     },
                 }
             ]
         },
         //.............此处表示更多

         ]

*/
WTServerAPI.prototype.CabinetBoxHandlerCacheData = {};
WTServerAPI.prototype.CabinetBoxHandler = function (room, cabinetNub, sucFunc, failFunc, beCache) {
    var _this = this;
    if (beCache) {
        var cachedata = _this.CabinetBoxHandlerCacheData["c_" + room + "_" + cabinetNub];
        if (cachedata) {
            sucFunc(cachedata);
            return;
        }
    }
    var url = _this.ServerUrl + "/CBHandler.ashx?action=cabInfo&roomID=" + wtserverAPI.roomId(room)
    if (cabinetNub) {
        url += "&cabinetNub=" + cabinetNub;
    }
    httpGetSyn(url,//这里要同步获取信息 不能用异步
        function (rs) {
            if (sucFunc) {
                if (cabinetNub == -1) {
                    _this.CabinetBoxHandlerCacheData["c_" + room + "_-1"] = rs.result;
                }
                if (rs && rs.result && rs.result.length && rs.result.length > 0) {
                    $.each(rs.result, function (_index, _obj) {
                        if (_obj) {
                            _this.CabinetBoxHandlerCacheData["c_" + room + "_" + _obj.cabName] = _obj;
                        }
                    });
                }
                sucFunc(_this.CabinetBoxHandlerCacheData);
            }
        },
        function (err) {
            if (failFunc) {
                failFunc(err);
            }
        });

}
WTServerAPI.prototype.getCabinetByUUID = function (roomName, uuid) {
    var _this = this;
    var _cab = null;
    var allCabs = _this.CabinetBoxHandlerCacheData["c_" + roomName + "_-1"];
    $.each(allCabs, function (_index, _obj) {
        if (_obj.cabinetNub == uuid) {
            _cab = _obj;
        }
    });
    return _cab;
}
/**

 *获取端口信息
接口方式:get
返回格式: json
Url:服务端自定
参数:
action:  “ports”                                  // 执行的方法
devGuid: “”                                          // 设备ID devGuid代表设备guid

返回格式(参考)
{
        "resultCode": "success",
        "error": {
            "errorCode": 0,
            "errorInfo": "此处显示错误信息"
        },
"result":[
        {Name:’端口名称’,
     Value:’端口状态’    },
         ………
]


    }

 
 *根据服务器id获取端口信息
http://116.249.124.141:8081/3droom/api/ashx/CBHandler.ashx?action=ports&hostid=xxxx
 */
WTServerAPI.prototype.PortCacheData = {};
WTServerAPI.prototype.PortHandler = function (serverId, beCache, sucFunc, failFunc) {
    var _this = this;
    if (beCache) {
        var cachedata = _this.PortCacheData["s_" + serverId];
        if (cachedata) {
            sucFunc(cachedata);
            return;
        }
    }
    var url = _this.ServerUrl + "/CBHandler.ashx?action=ports&devGuid=" + serverId;
    httpGet(url,
        function (rs) {
            if (sucFunc) {
                if (rs && rs.result && rs.result.length > 0) {
                    _this.PortCacheData["s_" + serverId] = rs.result;
                    sucFunc(_this.PortCacheData["s_" + serverId]);
                } else if (rs && rs.error && rs.error.errorInfo) {
                    if (failFunc) {
                        failFunc(rs.error.errorInfo);
                    }
                }
            }
        },
        function (err) {
            if (failFunc) {
                failFunc(err);
            }
        });
}

//机柜利用率
/*
接口方式:get
返回格式: json
Url:服务端自定
参数:
action:  “CabRate”                                      // 执行的方法
 roomID : “c12d7373-a6db-4a3f-96a0-f1a851a8825d”         // 机房ID,


返回格式(参考)
{
        "resultCode": "success",
        "error": {
            "errorCode": 0,
            "errorInfo": "此处显示错误信息"
        },
"result":[
{
 "cabid":"此处为机柜id",
 "useRate":"0.8",//利用率
  “strUseRate”: 23/42 // 利用率比例

},
{
 "cabid":"此处为机柜id",
 "useRate":"0.4",//利用率
“strUseRate”: 23/42 // 利用率比例
}
......//此处表示更多
]

}

*/
WTServerAPI.prototype.CabRate = function (roomID, sucFunc, failFunc) {
    var _this = this;

    var url = _this.ServerUrl + "/CBHandler.ashx?action=CabRate&roomID=" + _this.roomId(roomID);
    httpGet(url,
        function (rs) {
            if (sucFunc) {
                if (rs && rs.resultCode && rs.resultCode == "success" && rs.result && rs.result.length && rs.result.length > 0) {
                    sucFunc(rs.result);
                } else {
                    if (failFunc) {
                        failFunc(rs.error);
                    }
                }
            }
        },
        function (err) {
            if (failFunc) {
                failFunc(err);
            }
        });

}

//空闲空间
/*
接口方式:get
返回格式: json
Url:服务端自定
参数:
action:  “FreeSpace”                                      // 执行的方法
roomID : “c12d7373-a6db-4a3f-96a0-f1a851a8825d”         // 机房ID,


返回格式(参考)
{
        "resultCode": "success",
        "error": {
            "errorCode": 0,
            "errorInfo": "此处显示错误信息"
        },
"result":[
{
 "cabid":"此处为机柜id",
 "uPositionUsed":[1,2,3,4,5],//表示u位被占用

},
{
 "cabid":"此处为机柜id",
"uPositionUsed":[12,13,14,15],//表示u位被占用
}
......//此处表示更多
]

    }


*/
WTServerAPI.prototype.FreeSpaceCacheData = null;
WTServerAPI.prototype.FreeSpace = function (roomID, sucFunc, failFunc, fromCache) {
    var _this = this;
    if (fromCache) {
        return _this.FreeSpaceCacheData;
    }
    var url = _this.ServerUrl + "/CBHandler.ashx?action=FreeSpace&roomID=" + _this.roomId(roomID);
    httpGet(url,
        function (rs) {
            if (sucFunc) {
                if (rs && rs.resultCode && rs.resultCode == "success" && rs.result && rs.result.length && rs.result.length > 0) {
                    _this.FreeSpaceCacheData = rs.result;
                    sucFunc(rs.result);
                } else {
                    if (failFunc) {
                        failFunc(rs.error);
                    }
                }
            }
        },
        function (err) {
            if (failFunc) {
                failFunc(err);
            }
        });

}


//温度云图
/*
接口方式:get
返回格式: json
Url:服务端自定
参数:
action:  “Tnephogram”                                      // 执行的方法
roomID : “c12d7373-a6db-4a3f-96a0-f1a851a8825d”               // 机房ID

返回格式(参考)
{
        "resultCode": "success",
        "error": {
            "errorCode": 0,
            "errorInfo": "此处显示错误信息"
        },
"result":[
{
 "thDevGuid":"此处为温湿度设备id",
 "position":{"x":"1","y":"50"},//位置
 "tValue":"25.6",//温度
},
{
 "thDevGuid":"此处为温湿度设备id",
  "position":{"x":"10","y":"100"},//位置
 "tValue":"80",//温度

}

]

    }

*/
WTServerAPI.prototype.TnephogramCacheData = null;
WTServerAPI.prototype.Tnephogram = function (roomID, sucFunc, failFunc) {
    var _this = this;
    var url = _this.ServerUrl + "/CBHandler.ashx?action=Tnephogram&roomID=" + _this.roomId(roomID);
    httpGet(url,
        function (rs) {
            if (sucFunc) {
                if (rs && rs.resultCode && rs.resultCode == "success" && rs.result && rs.result.length && rs.result.length > 0) {
                    _this.TnephogramCacheData = rs.result;
                    sucFunc(rs.result);
                } else {
                    if (failFunc) {
                        failFunc(rs.error);
                    }
                }
            }
        },
        function (err) {
            if (failFunc) {
                failFunc(err);
            }
        });
}

//湿度接口
/*
接口方式:get
返回格式: json
Url:服务端自定
参数:
action:  “Humidity”                                      // 执行的方法
roomID : “c12d7373-a6db-4a3f-96a0-f1a851a8825d”               // 机房ID


返回格式(参考)
{
        "resultCode": "success",
        "error": {
            "errorCode": 0,
            "errorInfo": "此处显示错误信息"
        },
"result":[
{
 "thDevGuid":"此处为温湿度设备id",
"position":{"x":"100","y":"100"},//位置
 "hValue":"80",//湿度
},
{
 "thDevGuid":"此处为温湿度设备id",
"position":{"x":"300","y":"500"},//位置
 "hValue":"80",//湿度
}
]

    }


*/
WTServerAPI.prototype.Humidity = function (roomID, sucFunc, failFunc) {
    var _this = this;
    var url = _this.ServerUrl + "/CBHandler.ashx?action=Humidity&roomID=" + _this.roomId(roomID);
    httpGet(url,
        function (rs) {
            if (sucFunc) {
                if (rs && rs.resultCode && rs.resultCode == "success" && rs.result && rs.result.length && rs.result.length > 0) {
                    sucFunc(rs.result);
                } else {
                    if (failFunc) {
                        failFunc(rs.error);
                    }
                }
            }
        },
        function (err) {
            if (failFunc) {
                failFunc(err);
            }
        });
}
//设备详细接口
/*
接口方式:get
返回格式: json
Url:服务端自定
参数:
action:  “deviceInfo”                                  // 执行的方法
devGuid: “”                                          // 设备ID devGuid代表设备guid

返回格式(参考)
{
        "resultCode": "success",
        "error": {
            "errorCode": 0,
            "errorInfo": "此处显示错误信息"
        },
    "result":{//设备详情
             }

    }

*/
WTServerAPI.prototype.DeviceInfo = function (devGuid, sucFunc, failFunc) {
    var _this = this;
    var url = _this.ServerUrl + "/CBHandler.ashx?action=deviceInfo&devGuid=" + devGuid;
    httpGet(url,
        function (rs) {
            if (sucFunc) {
                if (rs && rs.resultCode && rs.resultCode == "success" && rs.result) {
                    sucFunc(rs);
                } else {
                    if (failFunc) {
                        failFunc(rs.error);
                    }
                }
            }
        },
        function (err) {
            if (failFunc) {
                failFunc(err);
            }
        });
}

/*
获取机柜详细信息
接口方式:get
返回格式: json
Url:服务端自定
参数:
action:  “ecInfo”                                  // 执行的方法
devGuid: “”                                          // 机柜ID

返回格式(参考)
{
        "resultCode": "success",
        "error": {
            "errorCode": 0,
            "errorInfo": "此处显示错误信息"
        },
"result":[
        { AreaBelong:’所在区域’,
       ECName:’机柜名称’    },
PhysicalLocation:’位置’    },
UNumber:’U位数’    },
UseRate:’机柜使用率’    },
StrUseRate:’机柜使用率字符串标识’    },
TDP:’机柜中所有设备功耗之和’    }

]


    }

*/
WTServerAPI.prototype.getCabinetInfo = function (devGuid, sucFunc, failFunc) {
    var _this = this;
    var url = _this.ServerUrl + "/CBHandler.ashx?action=ecInfo&devGuid=" + devGuid;
    httpGet(url,
        function (rs) {
            if (sucFunc) {
                if (rs && rs.resultCode && rs.resultCode == "success" && rs.result) {
                    sucFunc(rs);
                } else {
                    if (failFunc) {
                        failFunc(rs.error);
                    }
                }
            }
        },
        function (err) {
            if (failFunc) {
                failFunc(err);
            }
        });

}
var wtserverAPI = null;

 

  三、逻辑控制代码

    

var WT3DModel;
function threeStart(_height,roomName,dataFunc) { // dataFunc 获取机柜,空调,墙等设备的json对象
    WT3DModel = new WT3D();   // 实例化 3D 核心对象,见 WT3D.core.js 文件。 
    var initOption = {
        antialias: true, // 启用平滑、抗锯齿效果
        loadSyn: true, // 是否启用异步加载
        showHelpGrid: false, // 是否显示网格线
        clearCoolr: 0x4068b0,  // 背景色
        clearColorOp: 0,    // 透明度
    };
    var Aobjects = {  // 给3D对象绑定事件
        objects: dataFunc(roomName),
        Animation: [
            {
                obj_name: "",
                obj_animation: function (_obj) {

                },
                animationType: 0, // 动画类型 -1永久循环执行 0触发执行 >=1执行多少次
                aniInterval: 1000, // 执行时间间隔 毫秒
            }],
        events: {
            dbclick: [
                {
                    obj_name: "ALL",
                    obj_event: function (_obj, face) { // 被选中的对象 被选中的面
                        // 此处设置双击聚焦
                        {
                            console.log(_obj);
                            console.log(face);
                            if (_obj.objType == "optimizeModel") {
                                console.log("optimizeModel");
                                console.log(_obj);
                                _obj = WT3DModel.commonFunc.getOldModelByNewModelAndFace(_obj, face);
                            }
                            modelBussiness.dbClickSelectCabinet(_obj, face);
                            var mainCamera = WT3DModel.camera;//主场景
                            //mainCamera.lookAt({
                            //    x:  _obj.position.x, y:  _obj.position.y, z: _obj.position.z
                            //});
                            var objpositionx = _obj.position.x;
                            var objpositiony = _obj.position.y;
                            var objpositionz = _obj.position.z;
                            if (typeof (_obj.parent) != 'undefined' && _obj.parent != null && typeof (_obj.parent.position) != 'undefined' && _obj.parent.position != null) {
                                objpositionx += _obj.parent.position.x;
                                objpositiony += _obj.parent.position.y;
                                objpositionz += _obj.parent.position.z;
                            }
                            if (typeof (_obj.oldPosition) != 'undefined' && _obj.oldPosition != null) {
                                objpositionx = _obj.oldPosition.x;
                                objpositiony = _obj.oldPosition.y;
                                objpositionz = _obj.oldPosition.z;
                            }
                            new TWEEN.Tween(WT3DModel.controls.target).to({   // WT3DModel.controls.target: 要改变的对象
                                x: objpositionx, y: objpositiony, z: objpositionz  // to({键值对:动画结束时移动到的文职,完成动画需要的时间})
                            }, 600).onComplete(function () {
                                var x_distance = mainCamera.position.x - objpositionx;
                                var y_distance = mainCamera.position.y - objpositiony;
                                var z_distance = mainCamera.position.z - objpositionz;
                                var lv = 1000 / Math.sqrt(x_distance * x_distance + y_distance * y_distance + z_distance * z_distance);
                                var runtweenTime = 1000;
                                if (lv > 0.6) {
                                    runtweenTime = 400;
                                } else if (lv > 0.3) {
                                    runtweenTime = 1000;
                                } else if (lv > 0.1) {
                                    runtweenTime = 1200;
                                } else if (lv > 0.05) {
                                    runtweenTime = 1600;
                                } else if (lv > 0.01) {
                                    runtweenTime = 2000;
                                } else {
                                    runtweenTime = 2500;
                                }
                                if (x_distance * x_distance + y_distance * y_distance + z_distance * z_distance > 800 * 800 && lv < 0.9999) {
                                    new TWEEN.Tween(mainCamera.position).to({
                                        x: objpositionx + (mainCamera.position.x - objpositionx) * lv, y: objpositiony, z: objpositionz + (mainCamera.position.z - objpositionz) * lv
                                    }, runtweenTime).start();
                                }
                            }).start();
                        }
                    }
                },
            ],
            mouseDown: [{
                obj_name: "ALL",
                obj_event: function (_obj, face) {
                    console.log("mouseDown");
                    console.log(_obj);
                    console.log(face);
                    if (_obj.objType == "optimizeModel") {
                        console.log("optimizeModel");
                        console.log(_obj);
                        _obj = WT3DModel.commonFunc.getOldModelByNewModelAndFace(_obj, face); // UNDO
                    }
                    modelBussiness.clickSelectCabinet(_obj, face);
                }
            },
            ],
            mouseUp: {
            },
            mouseMove: [{
                obj_name: "doorLeft",
                obj_event: function (_obj) {
                    console.log(_obj.name);
                    return true;//返回true表示移动
                }
            },
            ]
        },
        //WT3DModel.viewState;表示0编辑状态 1表示运行状态
        btns: [
            {
                btnid: "btn_reset",
                btnTitle: "场景复位",
                btnimg: "../../img/3dImg/reset.png",
                sortnub: 0,
                btnType: "system",
                enable: true,
                show_event: function () {
                    if (modelBussiness.lock == true) {
                        layer.tips("当前正在运行" + modelBussiness.currentLockDetail, "#btn_space");
                        return;
                    }
                    modelBussiness.currentLockDetail = "场景复位";
                    modelBussiness.lock = true;
                    setTimeout(function () {
                        modelBussiness.lock = false;
                    }, 1000);
                    modelBussiness.backBtn();
                },
            },
            {
                btnid: "btn_fps",
                btnTitle: "3D性能监测",
                btnimg: "../../img/3dImg/fps.png",
                sortnub: 0,
                btnType: "system",
                enable: true,
                show_event: function () {

                    var display = $("#Stats_output").css("display");
                    if (display == "none") {
                        $("#Stats_output").show();
                    } else {
                        $("#Stats_output").hide();
                    }
                },
            },
            {
                btnid: "btn_space",
                btnTitle: "机柜利用率",
                btnimg: "../../img/3dImg/space.png",
                sortnub: 0,
                btnType: "system",
                enable: true,
                show_event: function () {
                    if (modelBussiness.lock == true) {
                        layer.tips("当前正在运行" + modelBussiness.currentLockDetail, "#btn_space");
                        return;
                    }
                    modelBussiness.currentLockDetail = "机柜利用率";
                    modelBussiness.lock = true;
                    setTimeout(function () {
                        modelBussiness.lock = false;
                    }, 2000);
                    modelBussiness.showSpaceRate();
                },
            },
            {
                btnid: "btn_usage",
                btnTitle: "可用空间",
                btnimg: "../../img/3dImg/usage.png",
                sortnub: 0,
                btnType: "system",
                enable: true,
                show_event: function () {
                    if (modelBussiness.lock == true) {
                        layer.tips("当前正在运行" + modelBussiness.currentLockDetail, "#btn_usage");
                        return;
                    }
                    modelBussiness.currentLockDetail = "可用空间";
                    modelBussiness.lock = true;
                    setTimeout(function () {
                        modelBussiness.lock = false;
                    }, 2000);
                    modelBussiness.showUsageMap();
                },
            },

            {
                btnid: "btn_lines",
                btnTitle: "走线管理",
                btnimg: "../../img/3dImg/connection.png",
                sortnub: 0,
                btnType: "system",
                enable: true,
                show_event: function () {
                    if (modelBussiness.lock == true) {
                        layer.tips("当前正在运行" + modelBussiness.currentLockDetail, "#btn_lines");
                        return;
                    }
                    modelBussiness.currentLockDetail = "走线管理";
                    modelBussiness.lock = true;
                    setTimeout(function () {
                        modelBussiness.lock = false;
                    }, 1000);
                    modelBussiness.showLines();
                },
            },
            {
                btnid: "btn_temperature",
                btnTitle: "温度云图",
                btnimg: "../../img/3dImg/temperature.png",
                sortnub: 0,
                btnType: "system",
                enable: true,
                show_event: function () {
                    if (modelBussiness.lock == true) {
                        layer.tips("当前正在运行" + modelBussiness.currentLockDetail, "#btn_temperature");
                        return;
                    }
                    modelBussiness.currentLockDetail = "温度云图";
                    modelBussiness.lock = true;
                    setTimeout(function () {
                        modelBussiness.lock = false;
                    }, 2000);
                    modelBussiness.showTemptureMap();
                },
            },
            {
                btnid: "btn_water",
                btnTitle: "湿度",
                btnimg: "../../img/3dImg/water.png",
                sortnub: 0,
                btnType: "system",
                enable: true,
                show_event: function () {
                    if (modelBussiness.lock == true) {
                        layer.tips("当前正在运行" + modelBussiness.currentLockDetail, "#btn_water");
                        return;
                    }
                    modelBussiness.currentLockDetail = "湿度效果";
                    modelBussiness.lock = true;
                    setTimeout(function () {
                        modelBussiness.lock = false;
                    }, 2000);
                    modelBussiness.showHumidity();
                },
            },
            {
                btnid: "btn_smokeAlarm",
                btnTitle: "烟雾模拟",
                btnimg: "../../img/3dImg/smoke.png",
                sortnub: 0,
                btnType: "system",
                enable: true,
                show_event: function () {
                    if (modelBussiness.lock == true) {
                        layer.tips("当前正在运行" + modelBussiness.currentLockDetail, "#btn_smokeAlarm");
                        return;
                    }
                    modelBussiness.currentLockDetail = "烟雾模拟";
                    modelBussiness.lock = true;
                    setTimeout(function () {
                        modelBussiness.lock = false;
                    }, 2000);
                    modelBussiness.showFireAlarm();

                },
            },
            {
                btnid: "btn_winds",
                btnTitle: "空调风向",
                btnimg: "../../img/3dImg/air.png",
                sortnub: 0,
                btnType: "system",
                enable: true,
                show_event: function () {
                    if (modelBussiness.lock == true) {
                        layer.tips("当前正在运行" + modelBussiness.currentLockDetail, "#btn_winds");
                        return;
                    }
                    modelBussiness.currentLockDetail = "空调风向";
                    modelBussiness.lock = true;
                    setTimeout(function () {
                        modelBussiness.lock = false;
                    }, 1000);
                    modelBussiness.showWinds();
                },
            },
            //{
            //    btnid: "btn_power",
            //    btnTitle: "配店组",
            //    btnimg: "../../img/3dImg/power.png",
            //    sortnub: 0,
            //    btnType: "system",
            //    enable: true,
            //    show_event: function () {
            //        modelBussiness.showWinds();
            //    },
            //},
            //{
            //    btnid: "btn_alarm",
            //    btnTitle: "告警",
            //    btnimg: "../../img/3dImg/alarm.png",
            //    sortnub: 0,
            //    btnType: "system",
            //    enable: true,
            //    show_event: function () {
            //        modelBussiness.showWinds();
            //    },
            //},
            //{
            //    btnid: "btn_person",
            //    btnTitle: "巡检",
            //    btnimg: "../../img/3dImg/person.png",
            //    sortnub: 0,
            //    btnType: "system",
            //    enable: true,
            //    show_event: function () {
            //        modelBussiness.showWinds();
            //    },
            //},

        ]
    }

    if (parent != null && parent.Aobjects_objects != null) {
        Aobjects.objects = parent.Aobjects_objects;
    }
    //修改btns

    //优化Aobjects 此处用于优化 可以先异步加载图片
    /*
   [
   {
   imgurl: "../../img/3dImg/floor.jpg",
   width: 128,
   height: 128,
   },
   {
   imgurl:"../../img/3dImg/floor.jpg",
   },
   ]
   */
    Aobjects.imageList = [];
    imageUUIDList = [];
    //遍历获取图片资源
    function getImageList(obj) {
        if (obj && typeof (obj) == "object") {
            $.each(obj, function (_index, _obj) {
                if (_obj && _obj.imgurl) {
                    var imgObj = {};
                    imgObj.uuid = _obj.imgurl;
                    imgObj.imgurl = _obj.imgurl;
                    if ($.inArray(imgObj.uuid, imageUUIDList) < 0) {
                        imageUUIDList.push(imgObj.uuid);
                        Aobjects.imageList.push(imgObj);
                    }
                }
                getImageList(_obj);
            });
        }
    }
    getImageList(Aobjects.objects);
    if (_height != null && typeof (_height) != 'undefined' && _height == 0) {
        $("#canvas-frame").height($(document).height());
    }
    //检查是否存在动态资源需要加载
    var dynamicSource = [];
    $.each(Aobjects.objects, function (_index, _obj) {
        /*
        动态资源结构
        {
               name: '',
               objType: 'dynamicSource',
               file:"";
               loadedCallBackFuncName:""
           }
        */
        if (_obj && _obj.objType && _obj.objType == "dynamicSource") {
            dynamicSource.push(_obj);
        }
    });
    if (dynamicSource.length > 0) {
        WT3DModel.additionModels = {};
        var loadednub = 0;
        $.each(dynamicSource, function (_index, _obj) {
            $.getScript(_obj.file).done(function () {
                /* 耶,没有问题,这里可以干点什么 */
                loadednub++;
                if (loadednub == dynamicSource.length) {
                    $.each(dynamicSource, function (_dindex, _dobj) {
                        if (_dobj.loadedCallBackFuncName && _dobj.loadedCallBackFuncName != "") {
                            eval(_dobj.loadedCallBackFuncName + "()");
                        }
                    });
                }
            })
                .fail(function () {
                    /* 靠,马上执行挽救操作 */
                    console.log("文件加载失败");
                });
        });
    }

    WT3DModel.initWT3D('canvas-frame', initOption, Aobjects);
    WT3DModel.start();
}
//actionSign doorLeft doorRight cabinet1 cabinet2
function opcabinetdoor(_obj, _cmd, _func) {
    var doorstate = "close";
    var tempobj = null;
    if (typeof (_obj.doorState) != 'undefined' && _obj.doorState != null) {
        doorstate = _obj.doorState;
        tempobj = _obj.parent;
    } else {
        _obj.oldPosition = {
            x: _obj.parent.position.x, y: _obj.parent.position.y, z: _obj.parent.position.z
        }
        _obj.doorstate = "close";
        var _objparent = _obj.parent;
        tempobj = new THREE.Object3D();
        tempobj.position.set(_obj.position.x, _obj.position.y, _obj.position.z - _obj.geometry.parameters.depth / 2);
        _obj.position.set(0, 0, _obj.geometry.parameters.depth / 2);
        _obj.matrixAutoUpdate = true;
        tempobj.add(_obj);
        _objparent.add(tempobj);
    }
    if (typeof (_cmd) == 'undefined' || _cmd == null || _cmd == "") {
        _obj.doorState = (doorstate == "close" ? "open" : "close");
    } else {
        if (_cmd == _obj.doorState) {
            if (_func != null) {
                _func();
            }
            return;
        } else {
            _obj.doorState = _cmd;
        }
    }
    new TWEEN.Tween(tempobj.rotation).to({
        y: (_obj.doorState == "open" ? 0.5 * Math.PI : 0)
    }, 1000).onComplete(function () {
        if (_func != null) {
            _func();
        }
    }).start();
}
function openRightDoor(_obj, func, _cmd) {
    var doorstate = "close";
    var tempobj = null;
    if (_obj.doorState != null && typeof (_obj.doorState) != 'undefined') {
        doorstate = _obj.doorState;
        tempobj = _obj.parent;
    } else {
        _obj.oldPosition = { x: _obj.position.x, y: _obj.position.y, z: _obj.position.z }
        _obj.doorState = "close";
        var _objparent = _obj.parent;
        tempobj = new THREE.Object3D();
        tempobj.position.set(_obj.position.x - _obj.geometry.parameters.width / 2, _obj.position.y, _obj.position.z);
        _obj.position.set(_obj.geometry.parameters.width / 2, 0, 0);
        tempobj.add(_obj);
        _objparent.add(tempobj);
    }
    if (typeof (_cmd) == 'undefined' || _cmd == null || _cmd == "") {
        _obj.doorState = (doorstate == "close" ? "open" : "close");
    } else {
        if (_cmd == _obj.doorState) {
            if (func != null) {
                func();
            }
            return;
        } else {
            _obj.doorState = _cmd;
        }
    }
    new TWEEN.Tween(tempobj.rotation).to({
        y: (_obj.doorState == "open" ? 0.25 * 2 * Math.PI : 0 * 2 * Math.PI)
    }, 3000).easing(TWEEN.Easing.Elastic.Out).onComplete(
        function () {
            if (func != null) {
                func();
            }
        }
    ).start();
}
function openLeftDoor(_obj, func, _cmd) {
    var doorstate = "close";
    var tempobj = null;
    if (_obj.doorState != null && typeof (_obj.doorState) != 'undefined') {
        doorstate = _obj.doorState;
        tempobj = _obj.parent;
    } else {
        _obj.oldPosition = { x: _obj.position.x, y: _obj.position.y, z: _obj.position.z }
        _obj.doorState = "close";
        var _objparent = _obj.parent;
        tempobj = new THREE.Object3D();
        tempobj.position.set(_obj.position.x + _obj.geometry.parameters.width / 2, _obj.position.y, _obj.position.z);
        _obj.position.set(-_obj.geometry.parameters.width / 2, 0, 0);
        tempobj.add(_obj);
        _objparent.add(tempobj);
    }
    if (typeof (_cmd) == 'undefined' || _cmd == null || _cmd == "") {
        _obj.doorState = (doorstate == "close" ? "open" : "close");
    } else {
        if (_cmd == _obj.doorState) {
            if (func != null) {
                func();
            }
            return;
        } else {
            _obj.doorState = _cmd;
        }
    }
    new TWEEN.Tween(tempobj.rotation).to({
        y: (_obj.doorState == "open" ? -0.25 * 2 * Math.PI : 0 * 2 * Math.PI)
    }, 3000).easing(TWEEN.Easing.Elastic.Out).onComplete(function () {
        if (func != null) {
            func();
        }
    }).start();
}
function get3DConfiguration(stationId, sucfunc, failfunc, _userid) { // 没用到?
    businessService.getUser3DConfiguration(stationId, sucfunc, failfunc, _userid);
}

 

 

 

下节预告:

  下节课主要讲解微模块的实现与功能

 

技术交流 1203193731@qq.com

交流微信:

    

如果你有什么要交流的心得 可邮件我

 

其它相关文章:

使用webgl(three.js)创建3D机房,3D机房微模块详细介绍(升级版二)

如何用webgl(three.js)搭建一个3D库房-第一课

如何用webgl(three.js)搭建一个3D库房,3D密集架,3D档案室,-第二课

使用webgl(three.js)搭建一个3D建筑,3D消防模拟——第三课

使用webgl(three.js)搭建一个3D智慧园区、3D建筑,3D消防模拟,web版3D,bim管理系统——第四课

如何用webgl(three.js)搭建不规则建筑模型,客流量热力图模拟


原文链接:https://www.cnblogs.com/yeyunfei/p/10473021.html
如有疑问请与原作者联系

标签:

版权申明:本站文章部分自网络,如有侵权,请联系:west999com@outlook.com
特别注意:本站所有转载文章言论不代表本站观点,本站所提供的摄影照片,插画,设计作品,如需使用,请与原作者联系,版权归原作者所有

上一篇:【Leetcode】【简单】【14最长公共前缀】【JavaScript】

下一篇:js知识点总结