在Cisco IOS 中集成script脚本

2008-02-23 04:55:51来源：互联网阅读 ()

hostname R1
interface Loopback0
ip address 2.2.2.2 255.255.255.255 secondary
ip address 3.3.3.3 255.255.255.255 secondary
ip address 4.4.4.4 255.255.255.255 secondary
ip address 1.1.1.1 255.255.255.255

R1#tclsh
R1(tcl)#proc allens {} {
>(tcl)#foreach i {
>(tcl)#1.1.1.1
>(tcl)#2.2.2.2
>(tcl)#3.3.3.3
>(tcl)#4.4.4.4
>(tcl)#} {puts [ exec "ping $i" ] }
>(tcl)#}
R1(tcl)# 当输入allens时执行ping命令 R1#allens
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 1.1.1.1, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/3/4 ms
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 2.2.2.2, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/2/4 ms
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 3.3.3.3, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/2/4 ms
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 4.4.4.4, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/3/4 ms

标签：

版权申明：本站文章部分自网络，如有侵权，请联系：west999com@outlook.com
特别注意：本站所有转载文章言论不代表本站观点，本站所提供的摄影照片，插画，设计作品，如需使用，请与原作者联系，版权归原作者所有