用ASP实现就MP3曲目信息的操作全攻略

2009-05-12 14:52:58来源:未知 阅读 ()

新老客户大回馈,云服务器低至5折

先简单说一下MP3的ID3 标记,因为主要是操作这个玩意
MP3最开始的时候没有我们今天看到的那样,有歌手、年代,专集等等信息
只有一些简单的参数如yes/no来表示是不是privated或者copyrighted等信息,这样对MP3的相关工作带来了很多不便,1996年的时候有个老外提出来在每个MP3后面追加一段数据,用以存放上述的那些信息,后来就发展成为id3 v1 据我所知的现在已经到1.1了,具体的还是自己去查一下吧
还是老习惯,用metadata来引入DLL,我以前有文章贴过的,不知道的请自己去查
看代码

〈!--METADATA TYPE="typelib"
UUID="00000205-0000-0010-8000-00AA006D2EA4"
NAME="ADODB Type Library"
--〉
〈%
Function ConvertBin(Binary)
'This function converts a binary byte into an ASCII byte.
for i = 1 to LenB(Binary)
strChar = chr(AscB(MidB(Binary,i,1)))
ConvertBin = ConvertBin & strChar
Next
End Function
dim objStream
dim strTag, strSongName, strArtist, strAlbum, strYear, _
strComment, strGenre, strFile
'Specify the folder to iterate through, displaying all the MP3s
Const folder = "C:\mp3s\"
'Grab the folder information
Dim objFSO, objFolder, objFile
Set objFSO = Server.CreateObject("Scripting.FileSYstemObject")
Set objFolder = objFSO.GetFolder(folder)
'Create the Stream object
set objStream = Server.CreateObject("ADODB.Stream")
objStream.Type = adTypeBinary
'Loop through the files in the folder
For Each objFile in objFolder.Files
'Open the stream
objStream.Open
objStream.LoadFromFile objFile.Path
'Read the last 128 bytes
objStream.Position = objStream.size - 128
'Read the ID3 v1 tag info
strTag = ConvertBin(objStream.Read(3))
if ucase(strTag) = "TAG" then
strSongName = ConvertBin(objStream.Read(30))
strArtist = ConvertBin(objStream.Read(30))
strAlbum = ConvertBin(objStream.Read(30))
strYear = ConvertBin(objStream.Read(4))
strComment = ConvertBin(objStream.Read(30))
end if
'Display the results
response.write "〈table〉〈tr〉〈td colspan=2〉〈h3〉" & _
"ID3 Tag info for:〈/td〉〈/tr〉〈tr〉" & _
"〈td colspan=2〉" & objFile.Name & "〈/td〉〈/tr〉"
response.write "〈tr〉〈td〉〈b〉Artist: 〈/b〉〈/td〉" & _
"〈td〉" & strArtist & "〈/td〉〈/tr〉"
response.write "〈tr〉〈td〉〈b〉Track: 〈/b〉〈/td〉" & _
"〈td〉" & strSongName & "〈/td〉〈/tr〉"
response.write "〈tr〉〈td〉〈b〉Album: 〈/b〉〈/td〉" & _
〈td〉" & strAlbum & "〈/td〉〈/tr〉"
response.write "〈tr〉〈td〉〈b〉Year: 〈/b〉〈/td〉" & _
"〈td〉" & strYear & "〈/td〉〈/tr〉"
response.write "〈tr〉〈td〉〈b〉Comment: 〈/b〉" & _
"〈/td〉〈td〉" & strComment & "〈/td〉〈/tr〉"
response.write "〈/table〉"
objStream.Close
Response.Write "〈p〉〈hr〉〈p〉"
Next
Set objStream = Nothing 'Clean up...
%〉

标签:

版权申明:本站文章部分自网络,如有侵权,请联系:west999com@outlook.com
特别注意:本站所有转载文章言论不代表本站观点,本站所提供的摄影照片,插画,设计作品,如需使用,请与原作者联系,版权归原作者所有

上一篇:如何用ASP来获取客户端真实IP的地址?

下一篇:ASP中连接数据库的错误解决新解决办法