如何在启动机器时自动运行adsl拨号（1）

我们通常希望有一台机器能经常挂在网上，现在有了adsl包月服务，这已经不是问题。但是最近adsl总是会断线，当我回家想从公司的机器上拷贝一些文件的时候，有时会发现已经连接不上了。所以我做个程序所要实现的功能有这么两个，一是用程序来实现adsl拨号，二是要定时检测网络状态，三是要在启动机器时运行（既注册为服务）
我们先看一下如何做一个拨号程序
首先建一个ras拨号的单元文件（这是网上搜集的）
unit Ras;

interface

uses
Windows, SysUtils;

{$DEFINE WINVER400}
const
RasUnitVersion = 110;
CopyRight : String = '''' RasUnit (c) 97-98 F. Piette V1.10 '''';
rasapi32 = ''''rasapi32.dll'''';

UNLEN = 256; // Maximum user name length
PWLEN = 256; // Maximum password length
CNLEN = 15; // Computer name length
DNLEN = CNLEN; // Maximum domain name length

RAS_MaxDeviceType = 16;
RAS_MaxPhoneNumber = 128;
RAS_MaxIpAddress = 15;
RAS_MaxIpxAddress = 21;

{$IFDEF WINVER400}
RAS_MaxEntryName = 256;
RAS_MaxDeviceName = 128;
RAS_MaxCallbackNumber = RAS_MaxPhoneNumber;
{$ELSE}
RAS_MaxEntryName = 20;
RAS_MaxDeviceName = 32;
RAS_MaxCallbackNumber = 48;
{$ENDIF}

RAS_MaxAreaCode = 10;
RAS_MaxPadType = 32;
RAS_MaxX25Address = 200;
RAS_MaxFacilities = 200;
RAS_MaxUserData = 200;

RASCS_OpenPort = 0;
RASCS_PortOpened = 1;
RASCS_ConnectDevice = 2;
RASCS_DeviceConnected = 3;
RASCS_AllDevicesConnected = 4;
RASCS_Authenticate = 5;
RASCS_AuthNotify = 6;
RASCS_AuthRetry = 7;
RASCS_AuthCallback = 8;
RASCS_AuthChangePassword = 9;
RASCS_AuthProject = 10;
RASCS_AuthLinkSpeed = 11;
RASCS_AuthAck = 12;
RASCS_ReAuthenticate = 13;
RASCS_Authenticated = 14;
RASCS_PrepareForCallback = 15;
RASCS_WaitForModemReset = 16;
RASCS_WaitForCallback = 17;
RASCS_Projected = 18;

{$IFDEF WINVER400}
RASCS_StartAuthentication = 19;
RASCS_CallbackComplete = 20;
RASCS_LogonNetwork = 21;
{$ENDIF}
RASCS_SubEntryConnected = 22;
RASCS_SubEntryDisconnected= 23;

RASCS_PAUSED = $1000;
RASCS_Interactive = RASCS_PAUSED;
RASCS_RetryAuthentication = (RASCS_PAUSED 1);
RASCS_CallbackSetByCaller = (RASCS_PAUSED 2);
RASCS_PasswordExpired = (RASCS_PAUSED 3);

RASCS_DONE = $2000;
RASCS_Connected = RASCS_DONE;
RASCS_Disconnected = (RASCS_DONE 1);

// If using RasDial message notifications, get the notification message code
// by passing this string to the RegisterWindowMessageA() API.
// WM_RASDIALEVENT is used only if a unique message cannot be registered.
RASDIALEVENT = ''''RasDialEvent'''';
WM_RASDIALEVENT = $CCCD;

// TRASPROJECTION
RASP_Amb = $10000;
RASP_PppNbf = $0803F;
RASP_PppIpx = $0802B;
RASP_PppIp = $08021;
RASP_Slip = $20000;

type
THRASCONN = THandle;
PHRASCONN = ^THRASCONN;
TRASCONNSTATE = DWORD;
PDWORD = ^DWORD;
PBOOL = ^BOOL;

TRASDIALPARAMS = packed record
dwSize : DWORD;
szEntryName : array [0..RAS_MaxEntryName] of Char;
szPhoneNumber : array [0..RAS_MaxPhoneNumber] of Char;
szCallbackNumber : array [0..RAS_MaxCallbackNumber] of Char;
szUserName : array [0..UNLEN] of Char;
szPassword : array [0..PWLEN] of Char;
szDomain : array [0..DNLEN] of Char;
{$IFDEF WINVER401}
dwSubEntry : DWORD;
dwCallbackId : DWORD;
{$ENDIF}
szPadding : array [0..2] of Char;
end;
PRASDIALPARAMS = ^TRASDIALPARAMS;

TRASDIALEXTENSIONS = packed record
dwSize : DWORD;
dwfOptions : DWORD;
hwndParent : HWND;
reserved : DWORD;
end;
PRASDIALEXTENSIONS = ^TRASDIALEXTENSIONS;

TRASCONNSTATUS = packed record
dwSize : DWORD;
RasConnState : TRASCONNSTATE;
dwError : DWORD;
szDeviceType : array [0..RAS_MaxDeviceType] of char;
szDeviceName : array [0..RAS_MaxDeviceName] of char;
szPadding : array [0..1] of Char;
end;
PRASCONNSTATUS = ^TRASCONNSTATUS;

TRASCONN = packed record
dwSize : DWORD;
hRasConn : THRASCONN;
szEntryName : array [0..RAS_MaxEntryName] of char;

标签：

版权申明：本站文章部分自网络，如有侵权，请联系：west999com@outlook.com
特别注意：本站所有转载文章言论不代表本站观点，本站所提供的摄影照片，插画，设计作品，如需使用，请与原作者联系，版权归原作者所有