Tomcat源码分析 (九)----- HTTP请求处理过程(…
2019-08-26 06:22:59来源:博客园 阅读 ()
Tomcat源码分析 (九)----- HTTP请求处理过程(二)
我们接着上一篇文章的容器处理来讲,当postParseRequest方法返回true时,则由容器继续处理,在service方法中有connector.getService().getContainer().getPipeline().getFirst().invoke(request, response)这一行:
- Connector调用getService()返回StandardService;
- StandardService调用getContainer返回StandardEngine;
- StandardEngine调用getPipeline返回与其关联的StandardPipeline;
Engine处理请求
我们在前面的文章中讲过StandardEngine
的构造函数为自己的Pipeline添加了基本阀StandardEngineValve
,代码如下:
public StandardEngine() { super(); pipeline.setBasic(new StandardEngineValve()); try { setJvmRoute(System.getProperty("jvmRoute")); } catch(Exception ex) { log.warn(sm.getString("standardEngine.jvmRouteFail")); } }
接下来我们看看StandardEngineValve
的invoke()
方法。该方法主要是选择合适的Host,然后调用Host中pipeline的第一个Valve的invoke()
方法。
public final void invoke(Request request, Response response) throws IOException, ServletException { // Select the Host to be used for this Request Host host = request.getHost(); if (host == null) { response.sendError (HttpServletResponse.SC_BAD_REQUEST, sm.getString("standardEngine.noHost", request.getServerName())); return; } if (request.isAsyncSupported()) { request.setAsyncSupported(host.getPipeline().isAsyncSupported()); } // Ask this Host to process this request host.getPipeline().getFirst().invoke(request, response); }该方法很简单,校验该Engline 容器是否含有Host容器,如果不存在,返回400错误,否则继续执行
host.getPipeline().getFirst().invoke(request, response)
,可以看到 Host 容器先获取自己的管道,再获取第一个阀门,我们再看看该阀门的 invoke 方法。
Host处理请求
分析Host的时候,我们从Host的构造函数入手,该方法主要是设置基础阀门。public StandardHost() { super(); pipeline.setBasic(new StandardHostValve()); }
StandardPipeline调用getFirst得到第一个阀去处理请求,由于基本阀是最后一个,所以最后会由基本阀去处理请求。
StandardHost的Pipeline里面一定有 ErrorReportValve 与 StandardHostValve两个Valve,ErrorReportValve主要是检测 Http 请求过程中是否出现过什么异常, 有异常的话, 直接拼装 html 页面, 输出到客户端。
我们看看ErrorReportValve的invoke方法:
public void invoke(Request request, Response response) throws IOException, ServletException { // Perform the request // 1. 先将 请求转发给下一个 Valve getNext().invoke(request, response); // 2. 这里的 isCommitted 表明, 请求是正常处理结束 if (response.isCommitted()) { return; } // 3. 判断请求过程中是否有异常发生 Throwable throwable = (Throwable) request.getAttribute(RequestDispatcher.ERROR_EXCEPTION); if (request.isAsyncStarted() && ((response.getStatus() < 400 && throwable == null) || request.isAsyncDispatching())) { return; } if (throwable != null) { // The response is an error response.setError(); // Reset the response (if possible) try { // 4. 重置 response 里面的数据(此时 Response 里面可能有些数据) response.reset(); } catch (IllegalStateException e) { // Ignore } // 5. 这就是我们常看到的 500 错误码 response.sendError(HttpServletResponse.SC_INTERNAL_SERVER_ERROR); } response.setSuspended(false); try { // 6. 这里就是将 异常的堆栈信息组合成 html 页面, 输出到前台 report(request, response, throwable); } catch (Throwable tt) { ExceptionUtils.handleThrowable(tt); } if (request.isAsyncStarted()) { // 7. 若是异步请求的话, 设置对应的 complete (对应的是 异步 Servlet) request.getAsyncContext().complete(); } }
该方法首先执行了下个阀门的 invoke 方法。然后根据返回的Request 属性设置一些错误信息。那么下个阀门是谁呢?其实就是基础阀门了:StandardHostValve,该阀门的 invoke 的方法是如何实现的呢?
@Override public final void invoke(Request request, Response response) throws IOException, ServletException { // Select the Context to be used for this Request Context context = request.getContext(); if (context == null) { response.sendError (HttpServletResponse.SC_INTERNAL_SERVER_ERROR, sm.getString("standardHost.noContext")); return; } // Bind the context CL to the current thread if( context.getLoader() != null ) { // Not started - it should check for availability first // This should eventually move to Engine, it's generic. if (Globals.IS_SECURITY_ENABLED) { PrivilegedAction<Void> pa = new PrivilegedSetTccl( context.getLoader().getClassLoader()); AccessController.doPrivileged(pa); } else { Thread.currentThread().setContextClassLoader (context.getLoader().getClassLoader()); } } if (request.isAsyncSupported()) { request.setAsyncSupported(context.getPipeline().isAsyncSupported()); } // Don't fire listeners during async processing // If a request init listener throws an exception, the request is // aborted boolean asyncAtStart = request.isAsync(); // An async error page may dispatch to another resource. This flag helps // ensure an infinite error handling loop is not entered boolean errorAtStart = response.isError(); if (asyncAtStart || context.fireRequestInitEvent(request)) { // Ask this Context to process this request try { context.getPipeline().getFirst().invoke(request, response); } catch (Throwable t) { ExceptionUtils.handleThrowable(t); if (errorAtStart) { container.getLogger().error("Exception Processing " + request.getRequestURI(), t); } else { request.setAttribute(RequestDispatcher.ERROR_EXCEPTION, t); throwable(request, response, t); } } // If the request was async at the start and an error occurred then // the async error handling will kick-in and that will fire the // request destroyed event *after* the error handling has taken // place if (!(request.isAsync() || (asyncAtStart && request.getAttribute( RequestDispatcher.ERROR_EXCEPTION) != null))) { // Protect against NPEs if context was destroyed during a // long running request. if (context.getState().isAvailable()) { if (!errorAtStart) { // Error page processing response.setSuspended(false); Throwable t = (Throwable) request.getAttribute( RequestDispatcher.ERROR_EXCEPTION); if (t != null) { throwable(request, response, t); } else { status(request, response); } } context.fireRequestDestroyEvent(request); } } } // Access a session (if present) to update last accessed time, based on a // strict interpretation of the specification if (ACCESS_SESSION) { request.getSession(false); } // Restore the context classloader if (Globals.IS_SECURITY_ENABLED) { PrivilegedAction<Void> pa = new PrivilegedSetTccl( StandardHostValve.class.getClassLoader()); AccessController.doPrivileged(pa); } else { Thread.currentThread().setContextClassLoader (StandardHostValve.class.getClassLoader()); } }首先校验了Request 是否存在 Context,其实在执行 CoyoteAdapter.postParseRequest 方法的时候就设置了,如果Context 不存在,就返回500,接着还是老套路:context.getPipeline().getFirst().invoke,该管道获取的是基础阀门:StandardContextValve,我们还是关注他的 invoke 方法。
Context处理请求
接着Context会去处理请求,同理,StandardContextValve的invoke方法会被调用:
@Override public final void invoke(Request request, Response response) throws IOException, ServletException { // Disallow any direct access to resources under WEB-INF or META-INF MessageBytes requestPathMB = request.getRequestPathMB(); if ((requestPathMB.startsWithIgnoreCase("/META-INF/", 0)) || (requestPathMB.equalsIgnoreCase("/META-INF")) || (requestPathMB.startsWithIgnoreCase("/WEB-INF/", 0)) || (requestPathMB.equalsIgnoreCase("/WEB-INF"))) { response.sendError(HttpServletResponse.SC_NOT_FOUND); return; } // Select the Wrapper to be used for this Request Wrapper wrapper = request.getWrapper(); if (wrapper == null || wrapper.isUnavailable()) { response.sendError(HttpServletResponse.SC_NOT_FOUND); return; } // Acknowledge the request try { response.sendAcknowledgement(); } catch (IOException ioe) { container.getLogger().error(sm.getString( "standardContextValve.acknowledgeException"), ioe); request.setAttribute(RequestDispatcher.ERROR_EXCEPTION, ioe); response.sendError(HttpServletResponse.SC_INTERNAL_SERVER_ERROR); return; } if (request.isAsyncSupported()) { request.setAsyncSupported(wrapper.getPipeline().isAsyncSupported()); } wrapper.getPipeline().getFirst().invoke(request, response); }
Wrapper处理请求
Wrapper是一个Servlet的包装,我们先来看看构造方法。主要作用就是设置基础阀门StandardWrapperValve
。
public StandardWrapper() { super(); swValve=new StandardWrapperValve(); pipeline.setBasic(swValve); broadcaster = new NotificationBroadcasterSupport(); }
接下来我们看看StandardWrapperValve
的invoke()
方法。
@Override public final void invoke(Request request, Response response) throws IOException, ServletException { // Initialize local variables we may need boolean unavailable = false; Throwable throwable = null; // This should be a Request attribute... long t1=System.currentTimeMillis(); requestCount.incrementAndGet(); StandardWrapper wrapper = (StandardWrapper) getContainer(); Servlet servlet = null; Context context = (Context) wrapper.getParent(); // Check for the application being marked unavailable if (!context.getState().isAvailable()) { response.sendError(HttpServletResponse.SC_SERVICE_UNAVAILABLE, sm.getString("standardContext.isUnavailable")); unavailable = true; } // Check for the servlet being marked unavailable if (!unavailable && wrapper.isUnavailable()) { container.getLogger().info(sm.getString("standardWrapper.isUnavailable", wrapper.getName())); long available = wrapper.getAvailable(); if ((available > 0L) && (available < Long.MAX_VALUE)) { response.setDateHeader("Retry-After", available); response.sendError(HttpServletResponse.SC_SERVICE_UNAVAILABLE, sm.getString("standardWrapper.isUnavailable", wrapper.getName())); } else if (available == Long.MAX_VALUE) { response.sendError(HttpServletResponse.SC_NOT_FOUND, sm.getString("standardWrapper.notFound", wrapper.getName())); } unavailable = true; } // Allocate a servlet instance to process this request try { // 关键点1:这儿调用Wrapper的allocate()方法分配一个Servlet实例 if (!unavailable) { servlet = wrapper.allocate(); } } catch (UnavailableException e) { container.getLogger().error( sm.getString("standardWrapper.allocateException", wrapper.getName()), e); long available = wrapper.getAvailable(); if ((available > 0L) && (available < Long.MAX_VALUE)) { response.setDateHeader("Retry-After", available); response.sendError(HttpServletResponse.SC_SERVICE_UNAVAILABLE, sm.getString("standardWrapper.isUnavailable", wrapper.getName())); } else if (available == Long.MAX_VALUE) { response.sendError(HttpServletResponse.SC_NOT_FOUND, sm.getString("standardWrapper.notFound", wrapper.getName())); } } catch (ServletException e) { container.getLogger().error(sm.getString("standardWrapper.allocateException", wrapper.getName()), StandardWrapper.getRootCause(e)); throwable = e; exception(request, response, e); } catch (Throwable e) { ExceptionUtils.handleThrowable(e); container.getLogger().error(sm.getString("standardWrapper.allocateException", wrapper.getName()), e); throwable = e; exception(request, response, e); servlet = null; } MessageBytes requestPathMB = request.getRequestPathMB(); DispatcherType dispatcherType = DispatcherType.REQUEST; if (request.getDispatcherType()==DispatcherType.ASYNC) dispatcherType = DispatcherType.ASYNC; request.setAttribute(Globals.DISPATCHER_TYPE_ATTR,dispatcherType); request.setAttribute(Globals.DISPATCHER_REQUEST_PATH_ATTR, requestPathMB); // Create the filter chain for this request // 关键点2,创建过滤器链,类似于Pipeline的功能 ApplicationFilterChain filterChain = ApplicationFilterFactory.createFilterChain(request, wrapper, servlet); // Call the filter chain for this request // NOTE: This also calls the servlet's service() method try { if ((servlet != null) && (filterChain != null)) { // Swallow output if needed if (context.getSwallowOutput()) { try { SystemLogHandler.startCapture(); if (request.isAsyncDispatching()) { request.getAsyncContextInternal().doInternalDispatch(); } else { // 关键点3,调用过滤器链的doFilter,最终会调用到Servlet的service方法 filterChain.doFilter(request.getRequest(), response.getResponse()); } } finally { String log = SystemLogHandler.stopCapture(); if (log != null && log.length() > 0) { context.getLogger().info(log); } } } else { if (request.isAsyncDispatching()) { request.getAsyncContextInternal().doInternalDispatch(); } else { // 关键点3,调用过滤器链的doFilter,最终会调用到Servlet的service方法 filterChain.doFilter (request.getRequest(), response.getResponse()); } } } } catch (ClientAbortException e) { throwable = e; exception(request, response, e); } catch (IOException e) { container.getLogger().error(sm.getString( "standardWrapper.serviceException", wrapper.getName(), context.getName()), e); throwable = e; exception(request, response, e); } catch (UnavailableException e) { container.getLogger().error(sm.getString( "standardWrapper.serviceException", wrapper.getName(), context.getName()), e); // throwable = e; // exception(request, response, e); wrapper.unavailable(e); long available = wrapper.getAvailable(); if ((available > 0L) && (available < Long.MAX_VALUE)) { response.setDateHeader("Retry-After", available); response.sendError(HttpServletResponse.SC_SERVICE_UNAVAILABLE, sm.getString("standardWrapper.isUnavailable", wrapper.getName())); } else if (available == Long.MAX_VALUE) { response.sendError(HttpServletResponse.SC_NOT_FOUND, sm.getString("standardWrapper.notFound", wrapper.getName())); } // Do not save exception in 'throwable', because we // do not want to do exception(request, response, e) processing } catch (ServletException e) { Throwable rootCause = StandardWrapper.getRootCause(e); if (!(rootCause instanceof ClientAbortException)) { container.getLogger().error(sm.getString( "standardWrapper.serviceExceptionRoot", wrapper.getName(), context.getName(), e.getMessage()), rootCause); } throwable = e; exception(request, response, e); } catch (Throwable e) { ExceptionUtils.handleThrowable(e); container.getLogger().error(sm.getString( "standardWrapper.serviceException", wrapper.getName(), context.getName()), e); throwable = e; exception(request, response, e); } // Release the filter chain (if any) for this request // 关键点4,释放掉过滤器链及其相关资源 if (filterChain != null) { filterChain.release(); } // 关键点5,释放掉Servlet及相关资源 // Deallocate the allocated servlet instance try { if (servlet != null) { wrapper.deallocate(servlet); } } catch (Throwable e) { ExceptionUtils.handleThrowable(e); container.getLogger().error(sm.getString("standardWrapper.deallocateException", wrapper.getName()), e); if (throwable == null) { throwable = e; exception(request, response, e); } } // If this servlet has been marked permanently unavailable, // unload it and release this instance // 关键点6,如果servlet被标记为永远不可达,则需要卸载掉它,并释放这个servlet实例 try { if ((servlet != null) && (wrapper.getAvailable() == Long.MAX_VALUE)) { wrapper.unload(); } } catch (Throwable e) { ExceptionUtils.handleThrowable(e); container.getLogger().error(sm.getString("standardWrapper.unloadException", wrapper.getName()), e); if (throwable == null) { throwable = e; exception(request, response, e); } } long t2=System.currentTimeMillis(); long time=t2-t1; processingTime += time; if( time > maxTime) maxTime=time; if( time < minTime) minTime=time; }
通过阅读源码,我们发现了几个关键点。现罗列如下,后面我们会逐一分析这些关键点相关的源码。
- 关键点1:这儿调用Wrapper的allocate()方法分配一个Servlet实例
- 关键点2,创建过滤器链,类似于Pipeline的功能
- 关键点3,调用过滤器链的doFilter,最终会调用到Servlet的service方法
- 关键点4,释放掉过滤器链及其相关资源
- 关键点5,释放掉Servlet及相关资源
- 关键点6,如果servlet被标记为永远不可达,则需要卸载掉它,并释放这个servlet实例
关键点1 - Wrapper分配Servlet实例
我们来分析一下Wrapper.allocate()方法
@Override public Servlet allocate() throws ServletException { // If we are currently unloading this servlet, throw an exception // 卸载过程中,不能分配Servlet if (unloading) { throw new ServletException(sm.getString("standardWrapper.unloading", getName())); } boolean newInstance = false; // If not SingleThreadedModel, return the same instance every time // 如果Wrapper没有实现SingleThreadedModel,则每次都会返回同一个Servlet if (!singleThreadModel) { // Load and initialize our instance if necessary // 实例为null或者实例还未初始化,使用synchronized来保证并发时的原子性 if (instance == null || !instanceInitialized) { synchronized (this) { if (instance == null) { try { if (log.isDebugEnabled()) { log.debug("Allocating non-STM instance"); } // Note: We don't know if the Servlet implements // SingleThreadModel until we have loaded it. // 加载Servlet instance = loadServlet(); newInstance = true; if (!singleThreadModel) { // For non-STM, increment here to prevent a race // condition with unload. Bug 43683, test case // #3 countAllocated.incrementAndGet(); } } catch (ServletException e) { throw e; } catch (Throwable e) { ExceptionUtils.handleThrowable(e); throw new ServletException(sm.getString("standardWrapper.allocate"), e); } } // 初始化Servlet if (!instanceInitialized) { initServlet(instance); } } } if (singleThreadModel) { if (newInstance) { // Have to do this outside of the sync above to prevent a // possible deadlock synchronized (instancePool) { instancePool.push(instance); nInstances++; } } } // 非单线程模型,直接返回已经创建的Servlet,也就是说,这种情况下只会创建一个Servlet else { if (log.isTraceEnabled()) { log.trace(" Returning non-STM instance"); } // For new instances, count will have been incremented at the // time of creation if (!newInstance) { countAllocated.incrementAndGet(); } return instance; } } // 如果是单线程模式,则使用servlet对象池技术来加载多个Servlet synchronized (instancePool) { while (countAllocated.get() >= nInstances) { // Allocate a new instance if possible, or else wait if (nInstances < maxInstances) { try { instancePool.push(loadServlet()); nInstances++; } catch (ServletException e) { throw e; } catch (Throwable e) { ExceptionUtils.handleThrowable(e); throw new ServletException(sm.getString("standardWrapper.allocate"), e); } } else { try { instancePool.wait(); } catch (InterruptedException e) { // Ignore } } } if (log.isTraceEnabled()) { log.trace(" Returning allocated STM instance"); } countAllocated.incrementAndGet(); return instancePool.pop(); } }
总结下来,注意以下几点即可:
- 卸载过程中,不能分配Servlet
- 如果不是单线程模式,则每次都会返回同一个Servlet(默认Servlet实现方式)
Servlet
实例为null
或者Servlet
实例还未初始化
,使用synchronized来保证并发时的原子性- 如果是单线程模式,则使用servlet对象池技术来加载多个Servlet
接下来我们看看loadServlet()
方法
public synchronized Servlet loadServlet() throws ServletException { // Nothing to do if we already have an instance or an instance pool if (!singleThreadModel && (instance != null)) return instance; PrintStream out = System.out; if (swallowOutput) { SystemLogHandler.startCapture(); } Servlet servlet; try { long t1=System.currentTimeMillis(); // Complain if no servlet class has been specified if (servletClass == null) { unavailable(null); throw new ServletException (sm.getString("standardWrapper.notClass", getName())); } // 关键的地方,就是通过实例管理器,创建Servlet实例,而实例管理器是通过特殊的类加载器来加载给定的类 InstanceManager instanceManager = ((StandardContext)getParent()).getInstanceManager(); try { servlet = (Servlet) instanceManager.newInstance(servletClass); } catch (ClassCastException e) { unavailable(null); // Restore the context ClassLoader throw new ServletException (sm.getString("standardWrapper.notServlet", servletClass), e); } catch (Throwable e) { e = ExceptionUtils.unwrapInvocationTargetException(e); ExceptionUtils.handleThrowable(e); unavailable(null); // Added extra log statement for Bugzilla 36630: // https://bz.apache.org/bugzilla/show_bug.cgi?id=36630 if(log.isDebugEnabled()) { log.debug(sm.getString("standardWrapper.instantiate", servletClass), e); } // Restore the context ClassLoader throw new ServletException (sm.getString("standardWrapper.instantiate", servletClass), e); } if (multipartConfigElement == null) { MultipartConfig annotation = servlet.getClass().getAnnotation(MultipartConfig.class); if (annotation != null) { multipartConfigElement = new MultipartConfigElement(annotation); } } // Special handling for ContainerServlet instances // Note: The InstanceManager checks if the application is permitted // to load ContainerServlets if (servlet instanceof ContainerServlet) { ((ContainerServlet) servlet).setWrapper(this); } classLoadTime=(int) (System.currentTimeMillis() -t1); if (servlet instanceof SingleThreadModel) { if (instancePool == null) { instancePool = new Stack<>(); } singleThreadModel = true; } // 调用Servlet的init方法 initServlet(servlet); fireContainerEvent("load", this); loadTime=System.currentTimeMillis() -t1; } finally { if (swallowOutput) { String log = SystemLogHandler.stopCapture(); if (log != null && log.length() > 0) { if (getServletContext() != null) { getServletContext().log(log); } else { out.println(log); } } } } return servlet; }
关键的地方有两个:
- 通过实例管理器,创建Servlet实例,而实例管理器是通过特殊的类加载器来加载给定的类
- 调用Servlet的init方法
关键点2 - 创建过滤器链
创建过滤器链是调用的org.apache.catalina.core.ApplicationFilterFactory
的createFilterChain()
方法。我们来分析一下这个方法。该方法需要注意的地方已经在代码的comments里面说明了。
public static ApplicationFilterChain createFilterChain(ServletRequest request, Wrapper wrapper, Servlet servlet) { // If there is no servlet to execute, return null if (servlet == null) return null; // Create and initialize a filter chain object // 1. 如果加密打开了,则可能会多次调用这个方法 // 2. 为了避免重复生成filterChain对象,所以会将filterChain对象放在Request里面进行缓存 ApplicationFilterChain filterChain = null; if (request instanceof Request) { Request req = (Request) request; if (Globals.IS_SECURITY_ENABLED) { // Security: Do not recycle filterChain = new ApplicationFilterChain(); } else { filterChain = (ApplicationFilterChain) req.getFilterChain(); if (filterChain == null) { filterChain = new ApplicationFilterChain(); req.setFilterChain(filterChain); } } } else { // Request dispatcher in use filterChain = new ApplicationFilterChain(); } filterChain.setServlet(servlet); filterChain.setServletSupportsAsync(wrapper.isAsyncSupported()); // Acquire the filter mappings for this Context StandardContext context = (StandardContext) wrapper.getParent(); // 从这儿看出过滤器链对象里面的元素是根据Context里面的filterMaps来生成的 FilterMap filterMaps[] = context.findFilterMaps(); // If there are no filter mappings, we are done if ((filterMaps == null) || (filterMaps.length == 0)) return (filterChain); // Acquire the information we will need to match filter mappings DispatcherType dispatcher = (DispatcherType) request.getAttribute(Globals.DISPATCHER_TYPE_ATTR); String requestPath = null; Object attribute = request.getAttribute(Globals.DISPATCHER_REQUEST_PATH_ATTR); if (attribute != null){ requestPath = attribute.toString(); } String servletName = wrapper.getName(); // Add the relevant path-mapped filters to this filter chain // 类型和路径都匹配的情况下,将context.filterConfig放到过滤器链里面 for (int i = 0; i < filterMaps.length; i++) { if (!matchDispatcher(filterMaps[i] ,dispatcher)) { continue; } if (!matchFiltersURL(filterMaps[i], requestPath)) continue; ApplicationFilterConfig filterConfig = (ApplicationFilterConfig) context.findFilterConfig(filterMaps[i].getFilterName()); if (filterConfig == null) { // FIXME - log configuration problem continue; } filterChain.addFilter(filterConfig); } // Add filters that match on servlet name second // 类型和servlet名称都匹配的情况下,将context.filterConfig放到过滤器链里面 for (int i = 0; i < filterMaps.length; i++) { if (!matchDispatcher(filterMaps[i] ,dispatcher)) { continue; } if (!matchFiltersServlet(filterMaps[i], servletName)) continue; ApplicationFilterConfig filterConfig = (ApplicationFilterConfig) context.findFilterConfig(filterMaps[i].getFilterName()); if (filterConfig == null) { // FIXME - log configuration problem continue; } filterChain.addFilter(filterConfig); } // Return the completed filter chain return filterChain; }
关键点3 - 调用过滤器链的doFilter
ApplicationFilterChain类的doFilter函数代码如下,它会将处理委托给internalDoFilter函数。
@Override public void doFilter(ServletRequest request, ServletResponse response) throws IOException, ServletException { if( Globals.IS_SECURITY_ENABLED ) { final ServletRequest req = request; final ServletResponse res = response; try { java.security.AccessController.doPrivileged( new java.security.PrivilegedExceptionAction<Void>() { @Override public Void run() throws ServletException, IOException { internalDoFilter(req,res); return null; } } ); } catch( PrivilegedActionException pe) { Exception e = pe.getException(); if (e instanceof ServletException) throw (ServletException) e; else if (e instanceof IOException) throw (IOException) e; else if (e instanceof RuntimeException) throw (RuntimeException) e; else throw new ServletException(e.getMessage(), e); } } else { internalDoFilter(request,response); } }
ApplicationFilterChain类的internalDoFilter函数代码如下:
// 1. `internalDoFilter`方法通过pos和n来调用过滤器链里面的每个过滤器。pos表示当前的过滤器下标,n表示总的过滤器数量 // 2. `internalDoFilter`方法最终会调用servlet.service()方法 private void internalDoFilter(ServletRequest request, ServletResponse response) throws IOException, ServletException { // Call the next filter if there is one // 1. 当pos小于n时, 则执行Filter if (pos < n) { // 2. 得到 过滤器 Filter,执行一次post++ ApplicationFilterConfig filterConfig = filters[pos++]; try { Filter filter = filterConfig.getFilter(); if (request.isAsyncSupported() && "false".equalsIgnoreCase( filterConfig.getFilterDef().getAsyncSupported())) { request.setAttribute(Globals.ASYNC_SUPPORTED_ATTR, Boolean.FALSE); } if( Globals.IS_SECURITY_ENABLED ) { final ServletRequest req = request; final ServletResponse res = response; Principal principal = ((HttpServletRequest) req).getUserPrincipal(); Object[] args = new Object[]{req, res, this}; SecurityUtil.doAsPrivilege ("doFilter", filter, classType, args, principal); } else { // 4. 这里的 filter 的执行 有点递归的感觉, 通过 pos 来控制从 filterChain 里面拿出那个 filter 来进行操作 // 这里把this(filterChain)传到自定义filter里面,我们自定义的filter,会重写doFilter,在这里会被调用,doFilter里面会执行业务逻辑,如果执行业务逻辑成功,则会调用 filterChain.doFilter(servletRequest, servletResponse); ,filterChain就是这里传过去的this;如果业务逻辑执行失败,则return,filterChain终止,后面的servlet.service(request, response)也不会执行了 // 所以在 Filter 里面所调用 return, 则会终止 Filter 的调用, 而下面的 Servlet.service 更本就没有调用到 filter.doFilter(request, response, this); } } catch (IOException | ServletException | RuntimeException e) { throw e; } catch (Throwable e) { e = ExceptionUtils.unwrapInvocationTargetException(e); ExceptionUtils.handleThrowable(e); throw new ServletException(sm.getString("filterChain.filter"), e); } return; } // We fell off the end of the chain -- call the servlet instance try { if (ApplicationDispatcher.WRAP_SAME_OBJECT) { lastServicedRequest.set(request); lastServicedResponse.set(response); } if (request.isAsyncSupported() && !servletSupportsAsync) { request.setAttribute(Globals.ASYNC_SUPPORTED_ATTR, Boolean.FALSE); } // Use potentially wrapped request from this point if ((request instanceof HttpServletRequest) && (response instanceof HttpServletResponse) && Globals.IS_SECURITY_ENABLED ) { final ServletRequest req = request; final ServletResponse res = response; Principal principal = ((HttpServletRequest) req).getUserPrincipal(); Object[] args = new Object[]{req, res}; SecurityUtil.doAsPrivilege("service", servlet, classTypeUsedInService, args, principal); } else { //当pos等于n时,过滤器都执行完毕,终于执行了熟悉的servlet.service(request, response)方法。 servlet.service(request, response); } } catch (IOException | ServletException | RuntimeException e) { throw e; } catch (Throwable e) { e = ExceptionUtils.unwrapInvocationTargetException(e); ExceptionUtils.handleThrowable(e); throw new ServletException(sm.getString("filterChain.servlet"), e); } finally { if (ApplicationDispatcher.WRAP_SAME_OBJECT) { lastServicedRequest.set(null); lastServicedResponse.set(null); } } }
自定义Filter
@WebFilter(urlPatterns = "/*", filterName = "myfilter") public class FileterController implements Filter { @Override public void init(FilterConfig filterConfig) throws ServletException { System.out.println("Filter初始化中"); } @Override public void doFilter(ServletRequest servletRequest, ServletResponse servletResponse, FilterChain filterChain) throws IOException, ServletException { System.out.println("登录逻辑"); if("登录失败"){ response.getWriter().write("登录失败"); //后面的拦截器和servlet都不会执行了 return; } //登录成功,执行下一个过滤器 filterChain.doFilter(servletRequest, servletResponse); } @Override public void destroy() { System.out.println("Filter销毁中"); } }
- pos和n是ApplicationFilterChain的成员变量,分别表示过滤器链的当前位置和过滤器总数,所以当pos小于n时,会不断执行ApplicationFilterChain的doFilter方法;
- 当pos等于n时,过滤器都执行完毕,终于执行了熟悉的servlet.service(request, response)方法。
原文链接:https://www.cnblogs.com/java-chen-hao/p/11309722.html
如有疑问请与原作者联系
标签:
版权申明:本站文章部分自网络,如有侵权,请联系:west999com@outlook.com
特别注意:本站所有转载文章言论不代表本站观点,本站所提供的摄影照片,插画,设计作品,如需使用,请与原作者联系,版权归原作者所有
- java环境教程:Tomcat下载,安装,设置为Windows服务,启动 2020-06-09
- 你说研究过Spring里面的源码,循环依赖你会么? 2020-06-09
- 通俗理解spring源码(六)—— 默认标签(import、alias、be 2020-06-07
- 数据结构:用实例分析ArrayList与LinkedList的读写性能 2020-06-04
- Idea实现SpringBoot外置Tomcat的Web项目热部署(包含静态文 2020-06-04
IDC资讯: 主机资讯 注册资讯 托管资讯 vps资讯 网站建设
网站运营: 建站经验 策划盈利 搜索优化 网站推广 免费资源
网络编程: Asp.Net编程 Asp编程 Php编程 Xml编程 Access Mssql Mysql 其它
服务器技术: Web服务器 Ftp服务器 Mail服务器 Dns服务器 安全防护
软件技巧: 其它软件 Word Excel Powerpoint Ghost Vista QQ空间 QQ FlashGet 迅雷
网页制作: FrontPages Dreamweaver Javascript css photoshop fireworks Flash