javaIO——概述

2019-08-16 12:25:21来源：博客园阅读 ()

javaIO——概述

　　以前看java书，都将IO作为一个大的章节甚至模块来编写，可见IO在java语言中的重要性。

　　java的流按功能和处理的目标数据不同可以分为字节流和字符流。字符流处理的基本数据单元是字符；字节流处理的基本数据单元是字节。类关系结构图如下：

　　　　　　图片转自：https://blog.csdn.net/weixin_44411569/article/details/88788085

　　IO本身就是输入输出的意思，从上图可以看出，无论字符还是字节流，都是分为输入和输出两大块。

　　并且不管是输入还是输出流、字符流还是字节流，都实现了接口 java.io.Closeable ，该接口只有一个 close 方法。官方文档是这样说的：A {@code Closeable} is a source or destination of data that can be closed.The close method is invoked to release resources that the object is holding (such as open files).意思是说：

一个Closeable对象是一个可以关闭的数据源或者数据目标地，可以通过调用close方法来释放该对象所占用的资源（比如打开的文件）。显然，所谓数据源就是对应输入流，而数据目标代表输出流。

　　值得注意的是，从jdk1.7开始，Closeable 接口新增了一个 java.lang.AutoCloseable 父类接口，该接口也是只有一个 close 方法。看接口命名就知道，这个 close 方法是可以自动调用的。官方文档：The {@link #close()} method of an {@code AutoCloseable} object is called automatically when exiting a {@code try}-with-resources block for which the object has been declared in the resource specification header.意思是在退出 try 代码块的时候自动调用 AutoCloseable.close 方法，这些AutoCloseable对象在try-with-resources代码块中声明。也就是说以后在使用 Closeable 对象的时候，不用再使用 finally 调用 close 方法了，只需要把声明资源的代码写进try代码块。

　　1. 字符输入流：

　　　　字符输入流的基类是 java.io.Reader，这是一个抽象类，除了 Closeable 接口还继承了 java.lang.Readable，该接口只有一个 public int read(java.nio.CharBuffer cb)throws IOException; 方法，Reader实现了该方法。Reader有4个read重载方法：

public int read(java.nio.CharBuffer target) throws IOException {
        int len = target.remaining();
        char[] cbuf = new char[len];
        int n = read(cbuf, 0, len);
        if (n > 0)
            target.put(cbuf, 0, n);
        return n;
    }

public int read() throws IOException {
        char cb[] = new char[1];
        if (read(cb, 0, 1) == -1)
            return -1;
        else
            return cb[0];
    }

public int read(char cbuf[]) throws IOException {
        return read(cbuf, 0, cbuf.length);
    }

abstract public int read(char cbuf[], int off, int len) throws IOException;

　　　　可以看出，第4个为核心方法，其它3个都调用它，它也是抽象方法，需要子类实现。不过几种已知子类都做了各自的重写。带参数的read方法作用是把内容读入参数指定的字符数组或者CharBuffer对象。

　　2. 字符输出流：

　　　　字符输出流的基类是 java.io.Writer，也是抽象类，除了 Closeable 接口还继承了 java.lang.Appendable 和 java.io.Flushable，分别提供 append() 和 flush() 方法，其中 append 方法是重载的。

　　　　2.1. 既然集成了 Flushable，当然是需要设计缓存的，Writer 中预置了 private char[] writeBuffer; 来作为缓存空间，并且设置了 private static final int WRITE_BUFFER_SIZE = 1024; 作为默认缓存大小。

　　　　2.2. Writer重载了5个 write() 方法分别针对单字符、字符数组或字符串的参数场景，以及3个 append() 方法：

/**
     * Writes a single character.  The character to be written is contained in
     * the 16 low-order bits of the given integer value; the 16 high-order bits
     * are ignored.
     *
     * <p> Subclasses that intend to support efficient single-character output
     * should override this method.
     *
     * @param  c
     *         int specifying a character to be written
     *
     * @throws  IOException
     *          If an I/O error occurs
     */
    public void write(int c) throws IOException {
        synchronized (lock) {
            if (writeBuffer == null){
                writeBuffer = new char[WRITE_BUFFER_SIZE];
            }
            writeBuffer[0] = (char) c;
            write(writeBuffer, 0, 1);
        }
    }

    /**
     * Writes an array of characters.
     *
     * @param  cbuf
     *         Array of characters to be written
     *
     * @throws  IOException
     *          If an I/O error occurs
     */
    public void write(char cbuf[]) throws IOException {
        write(cbuf, 0, cbuf.length);
    }

    /**
     * Writes a portion of an array of characters.
     *
     * @param  cbuf
     *         Array of characters
     *
     * @param  off
     *         Offset from which to start writing characters
     *
     * @param  len
     *         Number of characters to write
     *
     * @throws  IOException
     *          If an I/O error occurs
     */
    abstract public void write(char cbuf[], int off, int len) throws IOException;

    /**
     * Writes a string.
     *
     * @param  str
     *         String to be written
     *
     * @throws  IOException
     *          If an I/O error occurs
     */
    public void write(String str) throws IOException {
        write(str, 0, str.length());
    }

    /**
     * Writes a portion of a string.
     *
     * @param  str
     *         A String
     *
     * @param  off
     *         Offset from which to start writing characters
     *
     * @param  len
     *         Number of characters to write
     *
     * @throws  IndexOutOfBoundsException
     *          If <tt>off</tt> is negative, or <tt>len</tt> is negative,
     *          or <tt>off+len</tt> is negative or greater than the length
     *          of the given string
     *
     * @throws  IOException
     *          If an I/O error occurs
     */
    public void write(String str, int off, int len) throws IOException {
        synchronized (lock) {
            char cbuf[];
            if (len <= WRITE_BUFFER_SIZE) {
                if (writeBuffer == null) {
                    writeBuffer = new char[WRITE_BUFFER_SIZE];
                }
                cbuf = writeBuffer;
            } else {    // Don't permanently allocate very large buffers.
                cbuf = new char[len];
            }
            str.getChars(off, (off + len), cbuf, 0);
            write(cbuf, 0, len);
        }
    }

    /**
     * Appends the specified character sequence to this writer.
     *
     * <p> An invocation of this method of the form <tt>out.append(csq)</tt>
     * behaves in exactly the same way as the invocation
     *
     * <pre>
     *     out.write(csq.toString()) </pre>
     *
     * <p> Depending on the specification of <tt>toString</tt> for the
     * character sequence <tt>csq</tt>, the entire sequence may not be
     * appended. For instance, invoking the <tt>toString</tt> method of a
     * character buffer will return a subsequence whose content depends upon
     * the buffer's position and limit.
     *
     * @param  csq
     *         The character sequence to append.  If <tt>csq</tt> is
     *         <tt>null</tt>, then the four characters <tt>"null"</tt> are
     *         appended to this writer.
     *
     * @return  This writer
     *
     * @throws  IOException
     *          If an I/O error occurs
     *
     * @since  1.5
     */
    public Writer append(CharSequence csq) throws IOException {
        if (csq == null)
            write("null");
        else
            write(csq.toString());
        return this;
    }

    /**
     * Appends a subsequence of the specified character sequence to this writer.
     * <tt>Appendable</tt>.
     *
     * <p> An invocation of this method of the form <tt>out.append(csq, start,
     * end)</tt> when <tt>csq</tt> is not <tt>null</tt> behaves in exactly the
     * same way as the invocation
     *
     * <pre>
     *     out.write(csq.subSequence(start, end).toString()) </pre>
     *
     * @param  csq
     *         The character sequence from which a subsequence will be
     *         appended.  If <tt>csq</tt> is <tt>null</tt>, then characters
     *         will be appended as if <tt>csq</tt> contained the four
     *         characters <tt>"null"</tt>.
     *
     * @param  start
     *         The index of the first character in the subsequence
     *
     * @param  end
     *         The index of the character following the last character in the
     *         subsequence
     *
     * @return  This writer
     *
     * @throws  IndexOutOfBoundsException
     *          If <tt>start</tt> or <tt>end</tt> are negative, <tt>start</tt>
     *          is greater than <tt>end</tt>, or <tt>end</tt> is greater than
     *          <tt>csq.length()</tt>
     *
     * @throws  IOException
     *          If an I/O error occurs
     *
     * @since  1.5
     */
    public Writer append(CharSequence csq, int start, int end) throws IOException {
        CharSequence cs = (csq == null ? "null" : csq);
        write(cs.subSequence(start, end).toString());
        return this;
    }

    /**
     * Appends the specified character to this writer.
     *
     * <p> An invocation of this method of the form <tt>out.append(c)</tt>
     * behaves in exactly the same way as the invocation
     *
     * <pre>
     *     out.write(c) </pre>
     *
     * @param  c
     *         The 16-bit character to append
     *
     * @return  This writer
     *
     * @throws  IOException
     *          If an I/O error occurs
     *
     * @since 1.5
     */
    public Writer append(char c) throws IOException {
        write(c);
        return this;
    }

View Code

　　3. 字节输入流：

　　　　字节输入流的基类是 java.io.InputStream，抽象类，继承 java.io.Closeable。InputStream 有3个重载的 read 方法，其中不带参的是抽象方法，供其它两个调用。此外，该类还提供了 skip（跳过）、mark（标记）、reset（重置位置）等实用方法。

/**
     * Reads the next byte of data from the input stream. The value byte is
     * returned as an <code>int</code> in the range <code>0</code> to
     * <code>255</code>. If no byte is available because the end of the stream
     * has been reached, the value <code>-1</code> is returned. This method
     * blocks until input data is available, the end of the stream is detected,
     * or an exception is thrown.
     *
     * <p> A subclass must provide an implementation of this method.
     *
     * @return     the next byte of data, or <code>-1</code> if the end of the
     *             stream is reached.
     * @exception  IOException  if an I/O error occurs.
     */
    public abstract int read() throws IOException;

    /**
     * Reads some number of bytes from the input stream and stores them into
     * the buffer array <code>b</code>. The number of bytes actually read is
     * returned as an integer.  This method blocks until input data is
     * available, end of file is detected, or an exception is thrown.
     *
     * <p> If the length of <code>b</code> is zero, then no bytes are read and
     * <code>0</code> is returned; otherwise, there is an attempt to read at
     * least one byte. If no byte is available because the stream is at the
     * end of the file, the value <code>-1</code> is returned; otherwise, at
     * least one byte is read and stored into <code>b</code>.
     *
     * <p> The first byte read is stored into element <code>b[0]</code>, the
     * next one into <code>b[1]</code>, and so on. The number of bytes read is,
     * at most, equal to the length of <code>b</code>. Let <i>k</i> be the
     * number of bytes actually read; these bytes will be stored in elements
     * <code>b[0]</code> through <code>b[</code><i>k</i><code>-1]</code>,
     * leaving elements <code>b[</code><i>k</i><code>]</code> through
     * <code>b[b.length-1]</code> unaffected.
     *
     * <p> The <code>read(b)</code> method for class <code>InputStream</code>
     * has the same effect as: <pre><code> read(b, 0, b.length) </code></pre>
     *
     * @param      b   the buffer into which the data is read.
     * @return     the total number of bytes read into the buffer, or
     *             <code>-1</code> if there is no more data because the end of
     *             the stream has been reached.
     * @exception  IOException  If the first byte cannot be read for any reason
     * other than the end of the file, if the input stream has been closed, or
     * if some other I/O error occurs.
     * @exception  NullPointerException  if <code>b</code> is <code>null</code>.
     * @see        java.io.InputStream#read(byte[], int, int)
     */
    public int read(byte b[]) throws IOException {
        return read(b, 0, b.length);
    }

    /**
     * Reads up to <code>len</code> bytes of data from the input stream into
     * an array of bytes.  An attempt is made to read as many as
     * <code>len</code> bytes, but a smaller number may be read.
     * The number of bytes actually read is returned as an integer.
     *
     * <p> This method blocks until input data is available, end of file is
     * detected, or an exception is thrown.
     *
     * <p> If <code>len</code> is zero, then no bytes are read and
     * <code>0</code> is returned; otherwise, there is an attempt to read at
     * least one byte. If no byte is available because the stream is at end of
     * file, the value <code>-1</code> is returned; otherwise, at least one
     * byte is read and stored into <code>b</code>.
     *
     * <p> The first byte read is stored into element <code>b[off]</code>, the
     * next one into <code>b[off+1]</code>, and so on. The number of bytes read
     * is, at most, equal to <code>len</code>. Let <i>k</i> be the number of
     * bytes actually read; these bytes will be stored in elements
     * <code>b[off]</code> through <code>b[off+</code><i>k</i><code>-1]</code>,
     * leaving elements <code>b[off+</code><i>k</i><code>]</code> through
     * <code>b[off+len-1]</code> unaffected.
     *
     * <p> In every case, elements <code>b[0]</code> through
     * <code>b[off]</code> and elements <code>b[off+len]</code> through
     * <code>b[b.length-1]</code> are unaffected.
     *
     * <p> The <code>read(b,</code> <code>off,</code> <code>len)</code> method
     * for class <code>InputStream</code> simply calls the method
     * <code>read()</code> repeatedly. If the first such call results in an
     * <code>IOException</code>, that exception is returned from the call to
     * the <code>read(b,</code> <code>off,</code> <code>len)</code> method.  If
     * any subsequent call to <code>read()</code> results in a
     * <code>IOException</code>, the exception is caught and treated as if it
     * were end of file; the bytes read up to that point are stored into
     * <code>b</code> and the number of bytes read before the exception
     * occurred is returned. The default implementation of this method blocks
     * until the requested amount of input data <code>len</code> has been read,
     * end of file is detected, or an exception is thrown. Subclasses are encouraged
     * to provide a more efficient implementation of this method.
     *
     * @param      b     the buffer into which the data is read.
     * @param      off   the start offset in array <code>b</code>
     *                   at which the data is written.
     * @param      len   the maximum number of bytes to read.
     * @return     the total number of bytes read into the buffer, or
     *             <code>-1</code> if there is no more data because the end of
     *             the stream has been reached.
     * @exception  IOException If the first byte cannot be read for any reason
     * other than end of file, or if the input stream has been closed, or if
     * some other I/O error occurs.
     * @exception  NullPointerException If <code>b</code> is <code>null</code>.
     * @exception  IndexOutOfBoundsException If <code>off</code> is negative,
     * <code>len</code> is negative, or <code>len</code> is greater than
     * <code>b.length - off</code>
     * @see        java.io.InputStream#read()
     */
    public int read(byte b[], int off, int len) throws IOException {
        if (b == null) {
            throw new NullPointerException();
        } else if (off < 0 || len < 0 || len > b.length - off) {
            throw new IndexOutOfBoundsException();
        } else if (len == 0) {
            return 0;
        }

        int c = read();
        if (c == -1) {
            return -1;
        }
        b[off] = (byte)c;

        int i = 1;
        try {
            for (; i < len ; i++) {
                c = read();
                if (c == -1) {
                    break;
                }
                b[off + i] = (byte)c;
            }
        } catch (IOException ee) {
        }
        return i;
    }

View Code

　　4. 字节输出流：

　　　　字节输出流的基类是 java.io.OutputStream，抽象类，继承 java.io,Closeable 和 java.io.Flushable接口。OutputStream 有3个重载的 write 方法，其中不带参的为抽象方法。

/**
     * Writes the specified byte to this output stream. The general
     * contract for <code>write</code> is that one byte is written
     * to the output stream. The byte to be written is the eight
     * low-order bits of the argument <code>b</code>. The 24
     * high-order bits of <code>b</code> are ignored.
     * <p>
     * Subclasses of <code>OutputStream</code> must provide an
     * implementation for this method.
     *
     * @param      b   the <code>byte</code>.
     * @exception  IOException  if an I/O error occurs. In particular,
     *             an <code>IOException</code> may be thrown if the
     *             output stream has been closed.
     */
    public abstract void write(int b) throws IOException;

    /**
     * Writes <code>b.length</code> bytes from the specified byte array
     * to this output stream. The general contract for <code>write(b)</code>
     * is that it should have exactly the same effect as the call
     * <code>write(b, 0, b.length)</code>.
     *
     * @param      b   the data.
     * @exception  IOException  if an I/O error occurs.
     * @see        java.io.OutputStream#write(byte[], int, int)
     */
    public void write(byte b[]) throws IOException {
        write(b, 0, b.length);
    }

    /**
     * Writes <code>len</code> bytes from the specified byte array
     * starting at offset <code>off</code> to this output stream.
     * The general contract for <code>write(b, off, len)</code> is that
     * some of the bytes in the array <code>b</code> are written to the
     * output stream in order; element <code>b[off]</code> is the first
     * byte written and <code>b[off+len-1]</code> is the last byte written
     * by this operation.
     * <p>
     * The <code>write</code> method of <code>OutputStream</code> calls
     * the write method of one argument on each of the bytes to be
     * written out. Subclasses are encouraged to override this method and
     * provide a more efficient implementation.
     * <p>
     * If <code>b</code> is <code>null</code>, a
     * <code>NullPointerException</code> is thrown.
     * <p>
     * If <code>off</code> is negative, or <code>len</code> is negative, or
     * <code>off+len</code> is greater than the length of the array
     * <code>b</code>, then an <tt>IndexOutOfBoundsException</tt> is thrown.
     *
     * @param      b     the data.
     * @param      off   the start offset in the data.
     * @param      len   the number of bytes to write.
     * @exception  IOException  if an I/O error occurs. In particular,
     *             an <code>IOException</code> is thrown if the output
     *             stream is closed.
     */
    public void write(byte b[], int off, int len) throws IOException {
        if (b == null) {
            throw new NullPointerException();
        } else if ((off < 0) || (off > b.length) || (len < 0) ||
                   ((off + len) > b.length) || ((off + len) < 0)) {
            throw new IndexOutOfBoundsException();
        } else if (len == 0) {
            return;
        }
        for (int i = 0 ; i < len ; i++) {
            write(b[off + i]);
        }
    }