isc dhcpd 3.0 快速安装实例 . --保存

############# isc-dhcpd 3.0 ##########
isc dhcpd 3.0 快速安装实例
############# isc-dhcpd 3.0 ##########
isc dhcpd 3.0 快速安装实例
阿土 Aborigen Yin
2003.06.19
目的：
为内网提供dhcp服务,每个网卡一个网段；
平台：
FreeBSD 5.1 + ports
#程序安装
cd /data/usr/ports/net/isc-dhcp3
make clean install clean
###配置
#/usr/local/etc/dhcpd.conf.sample 是个很好的参考文件；
###########
#注意：一下配置的多个网段，分别对应服务器上多个网卡的地址段，而不是单一网卡上的多个地址（address alias 地址别名）；
#如果你有某网卡设置多个地址，而配置文件中分别给这些网段设置了subnet（这是很多人所谓的”多网段dhcp地址分配“），那么启动
#dhcpd时，会收到如下错误,一般是发送到/var/log/messages：
#Jun 19 14:49:14 mail dhcpd: Interface fxp1 matches multiple shared networks
#
##############
#vi /usr/local/etc/dhcpd.conf
#begin of dhcpd.conf
# dhcpd.conf
server-identifier mail.oss4e.org;
option domain-name "oss4e.org";
option domain-name-servers 202.96.134.133;
default-lease-time 600;
max-lease-time 7200;
#重要，没有这一行不能启动dhcpd。
ddns-update-style none;
# If this DHCP server is the official DHCP server for the local
# network, the authoritative directive should be uncommented.
authoritative;
# Use this to send dhcp log messages to a different log file (you also
# have to hack syslog.conf to complete the redirection).
log-facility local7;
# Hosts which require special configuration options can be listed in
# host statements.   If no address is specified, the address will be
# allocated dynamically (if possible), but the host-specific information
# will still come from the host declaration.
# Fixed IP addresses can also be specified for hosts.   These addresses
# should not also be listed as being available for dynamic assignment.
# Hosts for which fixed IP addresses have been specified can boot using
# BOOTP or DHCP.   Hosts for which no fixed address is specified can only
# be booted with DHCP, unless there is an address range on the subnet
# to which a BOOTP client is connected which has the dynamic-bootp flag
# set.
#host fantasia {
#  hardware ethernet 08:00:07:26:c0:a5;
#  fixed-address fantasia.fugue.com;
#}
#group优先于subnet。
group {
                # PXE-specific configuration directives...
                #next-server 172.16.100.249;
                #filename "/pxelinux.0";
                # You need an entry like this for every host
                # unless you're using dynamic addresses

标签：

版权申明：本站文章部分自网络，如有侵权，请联系：west999com@outlook.com
特别注意：本站所有转载文章言论不代表本站观点，本站所提供的摄影照片，插画，设计作品，如需使用，请与原作者联系，版权归原作者所有