FreeBSD USB无线网卡 EDGE Modem

请问，有没有人在fb下成功使用过？

插入 usb edge modem后的 dmesg: (7-stable)
May 4 21:39:42 net1 root: Unknown USB device: vendor 0x0471 product 0x1237 bus uhub5
May 4 21:39:42 net1 kernel: umass0: <NXP> on uhub5
May 4 21:39:43 net1 kernel: (probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
May 4 21:39:43 net1 kernel: (probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
May 4 21:39:43 net1 kernel: (probe0:umass-sim0:0:0:0): SCSI Status: Check Condition
May 4 21:39:43 net1 kernel: (probe0:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0
May 4 21:39:43 net1 kernel: (probe0:umass-sim0:0:0:0): Not ready to ready change, medium may have changed
May 4 21:39:43 net1 kernel: (probe0:umass-sim0:0:0:0): Retrying Command (per Sense Data)
May 4 21:39:43 net1 kernel: cd0 at umass-sim0 bus 0 target 0 lun 0
May 4 21:39:43 net1 kernel: cd0: <Philips> Removable CD-ROM SCSI-0 device
May 4 21:39:43 net1 kernel: cd0: 1.000MB/s transfers
May 4 21:39:43 net1 kernel: cd0: cd present [7680 x 512 byte records]
May 4 21:39:43 net1 kernel: GEOM_LABEL: Label for provider cd0 is iso9660/901_EDGE MODEM.



在/dev里多了两个设备 /dev/cd0 /dev/pass0


有没有同志成功配置过？ 上面显示的插不插入sim卡都一样。

标签：

版权申明：本站文章部分自网络，如有侵权，请联系：west999com@outlook.com
特别注意：本站所有转载文章言论不代表本站观点，本站所提供的摄影照片，插画，设计作品，如需使用，请与原作者联系，版权归原作者所有